Tag Archives: Xtool X100 PAD2

Xtool X100 Pad2 Change Mileage on Seat Leon 2015 MQB

New test report: one of our customer has successfully corrected odometer on a Seat Leon 2015 MQB system using Xtool X100 Pad2 full version.

Note: X100 Pad2 only full version can change mileage for part of VAG MQB.  Xtool EZ500/PS80 does same job.
Connect X100 pad with vehicle via OBD
Select Odometer Adjustment function->Seat->Leon->MQB (2014.06-)




Only continental and VDO are supported, and more dashboard types are under development
Turn on ignition switch but don’t start engine
X100 Pad2 read current mileage which is the same as displayed on dashboard
Manually enter mileage you desired and confirm
 Communicating and writing data in progress
Change mileage succeed
Check new mileage on dashboard

Program Audi A4 2012 5th IMMO Remote key by Xtool X100 Pad2

New Test Feedback: Just add a smart remote key on a Audi A4 year 2014 5th generation immobilizer system using Xtool X100 Pad2 Pro full version. 

Note: Only X100 Pad2 full version with Xtool KC100 adapter has the VAG 4th & 5th Immo function. 

Have a working key and a smart key to be programmed

Connect X100 Pad2 with vehicle

Select VW/Audi/Skoda/Seat->4th/5th Immobilizer System->5th Immobilizer System

Xtool X100 pad 2 will ask 17 digits VIN code to continue
Turn ignition to ON position
Back to select 5th Immobilizer System

It will not ask for VIN code

Select 1. Read Immokey data

Name immo key data
If all keys lost, you should open headlights and press brakes.
Reading data completed.

Select 2 Show Immokey data

Select 3.Make Dealer Key
Insert key to be programmed into Xtool KC100 adapter
Writing key
Create dealer key success
Select 4.Match the key (Key Learning)
both 2 keys should be learnt
close the keys to turn the ignition to identify the key
Key learning success
Programming success.

Test the remote control and start vehicle.

Top 3 Tools to Read VW Pin code by OBD

There are several tools available to read pin code and program key for VAG group. Here are the demo guides to read pin code for VAG.


1) Read VAG Pin Code with Lonsdor K518

Lonsdor K518ISE/K518  key programmer comes with built-in Volkswagen 4th & 5th adapter, so it can read pin code and program key for VAG 2th, 3th, 4th, 5th Immobilizer by OBD directly.

Vehicle tested:

VW Santana 3000 year 2010 with 44 chip

Connect Lonsdor K518 with vehicle

Select Immobilizer->Volkswagen->2th& 3th Immo->Read Pin code->Engine






Turn ignition ON

Reading pin code…


K518 will read VW VIN, PIN and CS after 5 seconds.



2)Read VW Pin code with Xtool X100 Pad2

To read pin code and program key for VAG 4th 5th Immo, you need Xtool KC100 VAG 4th 5th Immo adapter to work with.

main steps:

Select VW/Audi/Skoda/Seat->4th 5th Immobilizer system

Turn ignition on

select 4th immobilizer
select instrument tyye
Turn ignition on
read immo code

Read pin, cs, vin success



3) Read Pin code with Xhorse VVDI2 VAG

all user of VVDI2, you can provide serial number to activate authorization for EDC17 and MEV17 for online CS calculation.



How to use Xtool X100 Pad2 to Read Peugeot 206 Pin Code

Guide to read BSI Pin Code on a Peugeot 206 2012 year with Xtool X100 Pad 2 key programmer.


Tools need:

Xtool X100 Pad2 tablet car key programmer

Xtool EEPROM adapter 


Connect X100 Pad2, eeprom adapter and bsi 95160 CPU chip



Select Read Pin Code


Select EEPROM adapter


Make sure the eeprom adapter is connected and powered on, the status indicator turns on


select car brand: Peugeot->206->BSI 95160




select V1 or V2

If have communication failed error, select another option or try again


Save data


Xtool X100 Pad 2 reading Puegot 206 pin code from BSI success.




Xtool X100 Pad2 Program Honda Civic 2015 All Keys Lost

Easy  guide to program smart key on a Honda Civic year 2015 when all keys lost by using Xtool X100 Pad2 key programmer via OBD within 3 minutes.



Connect X100 Pad2 with vehicle diagnostic socket through main test cable

Select car brand Honda/Acura->Smart key system->Type 3 (button) key->All smart keys lost




Take all smart keys out of the car


Put 1st smart key into car


Press on Start button for twice, check whether the ignition can be switched on

Press YES to continue


Enter number of smart keys to be programmed: 2


Take smart key out of the car


Put a new smart key into the car


Turn ignition off

Then turn ignition on within 15 seconds

Check security indicator light goes off



Turn ignition off

Switch ignition on within 15 seconds

Turn ignition off

Switch ignition on within 15 seconds

Xtool X100 Pad 2 programs Civic 2015 smart key success



Test the new smart keys.


Top 5 VAG 4th 5th IMMO Key Programming Tools Recommendation

Top 5 VAG 4th 5th IMMO key programming tools Wanted, all here:

  1. Xhorse VVDI2 +4th 5th Immo authorization service (Item NO. SV86-5) and Xhorse VVDI2+ 5th IMMO authorization service (Item NO.SV86-2)
  2. VVDI+ 4th IMMO coil (Item No. SO94) and VVDI + 5th IMMO coil (Item NO. PP030)
  3. XTOOL KC100 VW 4th & 5th IMMO Adapter for X-100 PAD2
  4. OBDSTAR RFID Code Reader Adapter
  5. JMD Handy Baby support only 4th IMMO programming

To sum up, in the Chinese locksmith market, there are 4 Companies who have solution to program VW Audi Skoda Seat 4th 5th IMMO, incl. Xhorse, XTOOL, OBDStar and JMD.



  1. (BEST) Xhorse VVDI2 VAG key programmer (Item NO. SV86)

Both VAG 4th 5th Immo OK  



  • vvdi2 vw 4th immo authorization:

– VAG with 4th immobilizer system

VW/Audi/Skoda/Seat/Porsche/Bentley vehicles all have 4th immobilizer car.


For Immo status, go to “Key Learn ->Key Learn”


–Passat /CC with 4th immobilizer system

Passat/CC has 2 transponder types: one is MEGAMOS 48, another one is HITAG2 (46 Transponder). Before make key you must select transponder type 48 or 46. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method.


–Touareg/Phaeton/A8/Cayenne/Bentley with 4th immobilizer system


This type use HITAG2 (46 Transponder).


–Audi A6/Q7/Allroad with 4th immobilizer system


This type use MEGAMOS 8E transponder. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method


2) 5th immobilizer system immo authorization:

This type use VAG immo5 transponder or OEM key support following cars: A4 (2009-), A5, Q5, A6 (2012-), A7, A8(2011-), Touareg (2011-) to make a dealer or learn keys.

Xhorse VVDI2 VAG support the 4th and 5th immobilizer systems

Xhorse VVDI2 +4th 5th Immo authorization service (Item NO. SV86-5)

Xhorse VVDI2+ 5th IMMO authorization service (Item NO.SV86-2)


  1. Old VVDI VAG interface: VW 4th/5th immobilizer programming OK


To program 4th 5th IMMO, VVDI need extra Coil.

VVDI 4th IMMO authorization service, pay extra $95for the coil:


VVDI 5th IMMO authorization plus VVDI:


Top 3: XTOOL X100 PAD2 + KC100 Program VAG 4TH 5TH IMMO

XTOOL X100 PAD2 full package with KC100 adapter is verified to program key for VAG 4th& 5th IMMO.

Matched Dashboard Type for 4th ,5th immobilizer of VW/Audi/Seat/Skoda:

CDC24C32,NEC24C32,9S12,NEC24C64,NEC24C64 color screen, Jiangsen, NEC95320, NEC24C64 white screen.


How to use KC100 adapter?

4th 5th immo-01

4th 5th immo-02

4th 5th immo-03

4th 5th immo-04

4th 5th immo-05

4th 5th immo-06

4th 5th immo-07

Top 4: OBDSTAR X300 DP/X300 Pro/X100 Pro+ RFID Adapter
OBDSTAR RFID IMMO adapter for VW AUDI SKODA SEAT 4 & 5 GEN,it is working with OBDSTAR Key Master DP/ X300 DP/ DP PAD/ Key Master/ X300 Pro3/ X100 Pro.

obdstar RFID reader suitable tools-01

Top 5: Handy Baby key programmer + JMD Assistant Handy baby OBD Adapter = 4th IMMO programming.

JMD Assistant -02

To program VAG 4th IMMO, you need an extra JMD Assistant Handy baby OBD Adapter, JMD Assistant is an OBD model to help Handy Baby to read out data from Volkswagen cars, and it needs your Handy Baby upgrade to at least version 8.0.0.
JMD Assistant reads data from Volkswagen cars only and won ‘t write any data to cars, even in all key lost , so it won ‘t be locked when the car connect to the server in 4S. Handy Baby reads data from JMD Assistant with RF, and it no needs any cables or computer during your work.



How to Solve Xtool X100 Pad2 Battery Problem


Hi, i recently purchased the Xtool x100 pad2 tablet key programmer and i love it. But i think i have a battery problem. I left it fully charged and 1 day later i tried to use it and it was dead. I also noticed that the battery drains very quickly when in use, from 100% to 60% in about 15mins. What can i do about this?  Is it possible for you to fix or replace it?


Final Solution to Xtool X100 PAD II Battery Drains and Power off problem from Xtooltech engineer:


Tools required:

1pc* Static bracelet

1pc* Hot air gun  (350±10℃ Temperature setup: 350±10℃)



Precautions: Please wear the static bracelet before each operation.



Procedure 1:  Change C6 capacitor

Position: C6

Name: Chip capacitor

Chip specification: 4.7UF/10V  0603

1.Disassemble the C6 capacitor and desolder a 4.7K 0603 resistor.




Procedure 2: Remove transistor

Position: Q14

Name: S8050

Chip specification:  0.1uF/50V 0402

1.Disassemble the Q14 transistor.



Procedure 3: Change C123 capacitor

Position: C123

Name: Chip capacitors

Chip specification:  0.1uF/50V 0402

1.Replace the C123 capacitor with a 3.3K%5  0402 resistor.





Xtool X-100 Pad vs. Xtool X-100 Pad2 Key Programmer

Here are the full comparison tables of Xtool  X-100 Pad2 and Xtool X-100 Pad key programmer regrading function and specification.


Function Comparison:

Full Comparison Xtool X100 Pad Xtool X100 PAD2 Standard Configuration Xtool X100 PAD2 Full Configuration
Image  xtool-x100-pad-front  xtool-x100-pad2-front  xtool-x100-pad2-front
OBDII Diagnosis No Diagnosis and immo function cover on the same cars.                       Four System Diagnosis:Engine control module, Brakes, central electrics, airbag. Diagnosis and immo function cover on the same cars.    Four System Diagnosis:Engine control module, Brakes, central electrics, airbag.
Immobilizer programming Yes It is optional to pay VW 4th /5th generation immobilizer programming. Support VW 4th/5th generation immobilizer programming.
Oil Reset/Engine oil light reset Yes Yes Yes
TPS Throttle Body Adaptation Yes Yes Yes
Odometer Adjustment Yes Yes Yes
EPB Electrical Parking Brake Adaptation Yes Yes Yes
Steering Angle Calibration Yes Yes Yes
ABS Exhaust Yes Yes Yes
Battery reset Yes Yes Yes
Headlight adjustment No Yes Yes
Gear learning Yes Yes Yes
TPMS tire pressure warning light reset Yes Yes Yes
ECU reset Yes Yes Yes
EEPROM adapter Yes Yes Yes
Exhaust Gas Treatment (DPF) Yes Yes Yes
Air Suspension No Yes Yes


 Specification Comparison:

Specification Comparison X100 PAD X100 PAD2 Standard / Full Configuration
Operation system Android 4.4 Android 4.4
Memory 16G RAM:1G Flash 1GB RAM, 16GB Flash
Battery capacity 2400mAh7.4V 2400mAh7.4V
Resolution 1024*600 1024*768
Display 7 inch IPS 5-point multi-touch screen 8.0 Inch IPS 5-Point Multi-touch Screen
HD input/output Port MINI HDMI MINI HDMI
Communication via Bluetooth via Cable
Standby Time 5H 8H
Connection Via wireless Via cable
Dimension 208*140*15.5mm 240*177*30mm