Tag Archives: xprog v5.70

Xprog, R280 and VVDI Prog BMW CAS4 5M48H Read/Write

It’s known to all that Xprog, R280 plus BDM programmer and VVDI Prog all can read and write BMW CAS4 5M48H. So, which one should you take for CAS4 5M48H R/W? Here is the buying guide of ecu programmers for 5M48H R/W.



(Cheapest) Option 1: Xprog v5.70 read/write CAS4 5M48H

Xprog price: $139

Note: 5.7.0 is the only version XPROG-M can decypte BMW CAS4


5M48H R/W process:

Run xprog software

Click on New

Xprog-read-write-CAS4-5M48H (1)


Read 5M48H

Xprog-read-write-CAS4-5M48H (2)

Xprog-read-write-CAS4-5M48H (3)

Then write 5M48H

Xprog-read-write-CAS4-5M48H (4)

Xprog-read-write-CAS4-5M48H (5)

Xprog-read-write-CAS4-5M48H (6)

Again, click on Read after verifying the device

Xprog-read-write-CAS4-5M48H (7)

Xprog-read-write-CAS4-5M48H (8)

Xprog read and write CAS4 5M48H successfully.



Option 2: R280 plus CAS4 programmer read/write CAS4 5M48H

R280 plus price: $469


5M48H R/W process:

R280 CAS+ IN CIRCUIT Programmer read 5M48H eeprom

R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(1) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(2) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(3) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(4) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(5) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(6) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(7) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(8)

R280 BDM programmer correct EIS/CAS odometer






R280 plus cas4 programmer write dumps to MCU





Cas4 programmer read MCU 5M48H







R280 programmer check EIS/CAS odometer






(Best) Option 3: XhorseVVDI Prog Programmer read/write CAS4 5M48H

Vvdi prog price: $429


5M48H R/W process:

Open VVDI Prog software, select type, manufacture and model as MC9S12XEP100)

Click “Wiring Diagram”

Maximize wiring diagram: right click and select “zoom window”, then pull down window.

Follow the wiring diagram to connect CAS to the VVDI Programmer.

Start to connect the cable.

The left zone is done, next is to do the right zone.

In this wiring diagram, it only need to remove one 0 ohm resistor to read out data, but one CAS ECU structure is different another one, some needs remove more electronic parts; we will show how to do in the other videos.

Next is to remove this 0 ohm resistor.

Wiring is done, 0 ohm resistor is removed

Plug adapter into VVDI Pro.

Close wiring diagram.

Select “New” – ” Read”

You see it is reading data very fast.

Reading data successfully, click “Save”

Next is to check data.
Open the data, drag the mouse to check, okay, data is all read out, close it.


Attach photos of the reading procedure

VVDI-Prog-read-cas4-5M48H (1)

VVDI-Prog-read-cas4-5M48H (2)

VVDI-Prog-read-cas4-5M48H (3)

VVDI-Prog-read-cas4-5M48H (4)

VVDI-Prog-read-cas4-5M48H (5)

VVDI-Prog-read-cas4-5M48H (6)

VVDI-Prog-read-cas4-5M48H (7)

VVDI-Prog-read-cas4-5M48H (8)

VVDI-Prog-read-cas4-5M48H (9)

In sum,

Xprog 5.7.0 is the only solution for BMW CAS4 among Xprog programmers; and it’s the CHEAPEST compared with vvdi prog and r280 plus.


Vvdi prog programmer is the best choice; cost-effective! It’s worth the money coz it covers the most chips (much more than r280)


Xprog M V5.70 Box ECU Programmer works on Win7

2016 latest version Xprog V5.70 Box ECU programmer with USB dongle has been tested and verified working in obdii365.com. Here are update information and the test result of xprog m 5.70.


Xprog info:

Xprog software: v5.7.0

Xprog firmware: v3.9

Type: XPROG-box

Link: USB dongle

High quality with one year warranty.

Operating system: Win XP/Win 7


Xprog v5.70 authorization:

BASIC SET Authorized

AUTH-0023 Authorized

AUTH-0024 Authorized

AUTH-0025 Authorized

AUTH-0027 Authorized


More authorization:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014


X-prog 5.70 new functions:

xprog-m-5-7-0-update-info-1 xprog-m-5-7-0-update-info-2 xprog-m-5-7-0-update-info-3 xprog-m-5-7-0-update-info-4 xprog-m-5-7-0-update-info-5 xprog-m-5-7-0-update-info-6 xprog-m-5-7-0-update-info-7 xprog-m-5-7-0-update-info-8 xprog-m-5-7-0-update-info-9 xprog-m-5-7-0-update-info-10 xprog-m-5-7-0-update-info-11 xprog-m-5-7-0-update-info-12 xprog-m-5-7-0-update-info-13 xprog-m-5-7-0-update-info-14 xprog-m-5-7-0-update-info-15 xprog-m-5-7-0-update-info-16 xprog-m-5-7-0-update-info-17 xprog-m-5-7-0-update-info-18 xprog-m-5-7-0-update-info-19 xprog-m-5-7-0-update-info-20 xprog-m-5-7-0-update-info-21

Xprog-m v5.70 test on MCU MC68HC908GR16_FLASH+security:


1- use “read security bytes” if security bytes (SS) unknown

2- click on “read security pass” button on the tool bar to “bypass security and read out SS”

3- obtain SS will be placed in to SS data base file and in the future never needs do “bypass security”

4- “bypass security” time -5 min…60mini


xprog-software-v5-7-0-read-write-mcu-1 xprog-software-v5-7-0-read-write-mcu-22