Tag Archives: Xprog M

How to download and install Xprog V5.84 Software

Here you can download V5.84 software for Xprog M box clone.

Software version: V5.84, Firmware:V4.4
xprog-v584-software
With USB Dongle, No need to activate
Firmware 4.4:
xprog-v584-hardware
Add new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9Language: English
XPROG-M V5.84 Authorizations:
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13
AUTH-0027-1 HC(S)908 update Authorized 2016/3/13
AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13
AUTH-0028-1 Renesas V850 Authorized 2017/10/9
AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
XPROG-M V5.84 Adapters:
ADP-0001 TMS370 PLCC28 programming adapter
ADP-0002 TMS370 PLCC44 programming adapter
ADP-0003 TMS370 PLCC68 programming adapter
ADP-0004 Motorola HC05B/X PLCC52 programming adapter
ADP-0005 Motorola HC05B/X QFP64 programming adapter
ADP-0006 ST M35080 in-circuit programming adapter
ADP-0008 TMS374 family in-circuit programming adapter
ADP-0009 MC68HC05V12 programming adapter
ADP-0010 TMS374 on-board programming adapter
ADP-0011 HC11EA9/E9 programming adapter
ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter
Additional adaptor for 5M48H P-Flash
ADP-0019 Rev.A
EWS3 adaptor
EEPROM adaptor
QFP28 adaptor
QFP64 adaptor
QFP80 adaptor
QFP112 adaptor
QFP144 adaptor
Free Download Xprog V5.84 Software 
Xprog 5.84 software installation tips:
Operating system:
1. Windows XP 32bit OR windows 7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well…
2. The windows system should be with at lest 2 partitions (except the CD ROM.)
3. Can not be working with virtual hard disk.
How to install xprog V5.84 on Windows 7?
Installation steps:
1. Click the file “installation.reg”, get the file information to the regedit.
2. Install the file “AdbeRdr11000_zh_CN.exe”, it is a must, otherwise the Xprog software will not start.
3. Plug the Xprog main interface to the computer, install the USB driver.
4. Copy the folder “XPROG-BOX5.84” to the desktop, and open it, and run the “xprogdesktop.exe”, then software open.

Xprog M V5.70 Box ECU Programmer works on Win7

2016 latest version Xprog V5.70 Box ECU programmer with USB dongle has been tested and verified working in obdii365.com. Here are update information and the test result of xprog m 5.70.

 

Xprog info:

Xprog software: v5.7.0

Xprog firmware: v3.9

Type: XPROG-box

Link: USB dongle

High quality with one year warranty.

Operating system: Win XP/Win 7

xprog-v5-70-info

Xprog v5.70 authorization:

BASIC SET Authorized

AUTH-0023 Authorized

AUTH-0024 Authorized

AUTH-0025 Authorized

AUTH-0027 Authorized

xprog-v5-70-authorization

More authorization:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, …) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, …) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014

 

X-prog 5.70 new functions:

xprog-m-5-7-0-update-info-1 xprog-m-5-7-0-update-info-2 xprog-m-5-7-0-update-info-3 xprog-m-5-7-0-update-info-4 xprog-m-5-7-0-update-info-5 xprog-m-5-7-0-update-info-6 xprog-m-5-7-0-update-info-7 xprog-m-5-7-0-update-info-8 xprog-m-5-7-0-update-info-9 xprog-m-5-7-0-update-info-10 xprog-m-5-7-0-update-info-11 xprog-m-5-7-0-update-info-12 xprog-m-5-7-0-update-info-13 xprog-m-5-7-0-update-info-14 xprog-m-5-7-0-update-info-15 xprog-m-5-7-0-update-info-16 xprog-m-5-7-0-update-info-17 xprog-m-5-7-0-update-info-18 xprog-m-5-7-0-update-info-19 xprog-m-5-7-0-update-info-20 xprog-m-5-7-0-update-info-21

Xprog-m v5.70 test on MCU MC68HC908GR16_FLASH+security:

Notes:

1- use “read security bytes” if security bytes (SS) unknown

2- click on “read security pass” button on the tool bar to “bypass security and read out SS”

3- obtain SS will be placed in to SS data base file and in the future never needs do “bypass security”

4- “bypass security” time -5 min…60mini

 

xprog-software-v5-7-0-read-write-mcu-1 xprog-software-v5-7-0-read-write-mcu-22

http://blog.obdii365.com/2016/11/29/xprog-v570-box-ecu-programmer-tested-ok/

 

 

Xprog and Winkfp fixed BMW R56 MCS FRM3 module

Successfully repaired my dead FRM3 model on my BMW R56, with the MINIMUM cost (xprog and BMW ICOM Winkfp)! Here, i wanna share something useful with you all.xprog

Note: The setup below did work for me, but i’m not sure of yours. You are at your risk.

 

My model:

2011 BMW R56

 

Reason for FRM repair:

I disconnected the battery and the DME to change the thermostat and when I put it back together the FRM was dead.

 

Tool i used:
Except the BMW ICOM A2 emulator plus ISTA+ I had, i also was shopping for xprog v5.55 boxes from

http://www.obdii365.com/wholesale/xprog-m-programmer-dongle-cas-decryption.html

Before this whole ordeal of the junk BMW/MINI FRM dying the only software I used was playing with was Carly for iOS and Dashcommand. But cannot solve issues.

 

BKGD location:

BKGD is on the HC(S)12 BDM adapter in the attached photo.

Vdd(+5V) = Vcc
RESET = B5
BKGD = B3
GND = GND (do not use the GND that is B0)

I think since we are not using the XCLKS and EXTAL flashing works with or without the BDM adapter.
Xprog m software installation:

I was not able to get this software to work with windows 7 64-bit. I was lucky enough to have an old HDD with windows 7 32-bit.
Before plugging in the xprog hardware go to system properties and change the device installation settings to never install driver software from windows update.
Xprog and FRM fix using Xprog:
Once the software was setup I hooked up the frm to the xprog and tried to make a backup of the existing EPROM via the MCU/MPU -> Freescale 9S12XE -> MC9s12XEQ384_EEE profile. Error partition corrupted. Set the sector to 16. I also made a backup of the existing P-FLASH via the MCU/MPU -> Freescale 9S12XE -> MC9s12XEQ384_P-FLASH profile. I think I got errors the first few times I tried to do this but restarting the program resolved the error.
In the MCU/MPU -> Freescale 9S12XE -> MC9s12XEQ384_EEE profile: erase, blank, open good EEE dump, write, verify, close, new, read.
This took several tries because the read back was still showing as blank.
I removed the BDM adapter and went direct into the xprog box. I also closed the program and reopened it when it kept giving me errors. After I was able to get a good write to the FRM I installed it back into the car and it was working again with a couple of errors (xenon high beam failure and fog light failure).
NCS expert & WINKFP setup for FRM:
In NCS expert I backed up the FRM, changed the VO and VIN, reset the FRM to factory and still had the high beam and fog errors. I proceeded to WINKFP to update the FRM and none of the ZB-numbers for my ECU worked. I updated WINKFP with BMW coding tool and the list of available ZB-numbers changed. After WINKFP was able to update the FRM I went back to NCS Expert and copied the VO from the CAS to the FRM and then set the FRM back to defaults. Everything was fixed. Fired up ISTA+ and cleared fault memory.

 

SOLVED!
Afterwards I hooked the frm back to the xprog and made a backup of the EEE and pflash.

My FRM:
R56 HIGH EKS 35 frm3r pl3 6135 3456395 01 23994322 sw141030 hw07 5324828c5
mc9s12xeq384mag
3m25j
Internet file:
R56 HIGH EKS 35 frm3r pl3 6135 3456987 01 23994322 sw156033 hw11 5324828r5

According to realoem parts 61353456395 and 61353456987 are Bilaterally exchangeable.
http://www.realoem.com/bmw/enUS/partsearch?id=SV33-USA-08-2010-R56N-Mini-Cooper_S&diagId=61_2102&q=61353456395

xprog-repair-frm3-1 xprog-repair-frm3-2 xprog-repair-frm3-3 xprog-repair-frm3-4

Hopefully this demonstrates to people it’s possible to repair these modules with the minimum cost.

http://blog.obdii365.com/2016/10/12/xprog-winkfp-fix-dead-frm3-on-bmw-r56/

Which tool to do BMW E92 Odometer Correction

I want to correct odometer in BMW E92 year 2008.  But I have some problem that I could not solve.

I have to change km in CAS and in cluster instrument, which have to flash first?
In the key is stored kilometers? Or this is updated each time you plug in the car?
CAS black or white, what does it?
I would like to buy a device that can flash the cas and cluster, or need a device for each element?
I understand that the hardware to program depends on the chips installed in the cas and cluster. I don’t care welding, what if I would be afraid if remove and replace a chip.

I saw others using these tools but I can’t afford.
M35080 V3.0 Mileage Programmer for BMW
AK300+ V1.5 Key Maker for BMW CAS
XPROG M V5.55
CAS3/912X/9S12X IN CIRCUIT PROGRAMMER
R270

Among these devices, what you advise? I do not mind the price.

 

Customer suggestion:

Put it like this:

1. CAS
White(Cas2) Black(cas3) does not matter. You need 9s12 secured programmer
I use Xprog 5.51 clone with 100% success rate so far.
R270, UPA, and many other can do this.
You need to read eeprom and set KM to 0
2. Dash
Open dash and find inside EEPROM 080DWQ or 35080 V6/VP
You need to erase this memory . R270 clone can erase 080DWQ but can’t erase V series. For this I use digimaster 3 odometer correction master tool but it’s a bit expensive. Best is to buy a set of new eeproms 35080 or 080DWQ doesn’t matter and use them.
Read eprom->save->Change KM to desired value>write to an erased eeprom.

 

Basically what you need:
R270 for Dash / Cas 1-3+ & 1 mask of CAS4
Digiprog 3 4.94 for Cas through OBD
Canfilters for unsupported CAS4 masks & FEM-modules.

Thats how most of the people do it, Dash + CASx/FEMx