Tag Archives: wiTech Micropod II

DRB III Emulator for Micropod II free Download on Mega

Free download DRB III Emulator on Mega:
drb3-download
DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007. The DRB III Emulator software application now runs on your personal computer and interfaces with our custom DRB III+ hardware device to enable all the functions of the original Chrysler DRB III Scan Tool and more. This software package even comes with non-powertrain ECU programming files to enable reflashing everything from BCMs to sliding door modules.
IMPORTANT: You can get DRBIII Emulator, DRBIII Enhanced Emulator setup and U-Scan Chrysler.
But no one holds responsibility of any risk you’ll take when using free DRBIII emulator software.
For security, you’re advised to the tested version sw with your Micropod 2 clone:
DRBIII Emulator Install:

For using DRBIII Emulator software with tools like VCI pod or Micropod II with witech version 14.xx.xx – 17.xx.xx, it depends on your device (clone or orig / old or newer release) and ONLY AFTER that, install DRBIII Emulator.
Watch screenshot.
install-drb3
Here is a step-by-step tutorial of DRBIII emulator on Micropod 2 clone:
DRB III Emulator Review: works on Micropod 2
I managed to make the Enhanced DRB III Emulator work with a micropod 2 clone on V17.04.27 Witech with Windows 7 32 bits all offline mode and no subscription.
First install Witech then install the DRB emulator and then the enhanced one.
find it here : C:\ProgramData\wiTECH\jserver\data\core\stubs
Or use the files provided in first post
Afterwards plug usb in pod then pod in the car turn ignition to on position and at last in the laptop
Open web browser, i used firefox and in the address bar put this and press enter : http://localhost:9876/launchExternalApp?appName=drb_iii_enhanced_emulator&locale=eng_ENG&deviceIp=172.22.22.22
It will launch the enhanced emulator.
DRB 3 Emulator Car List:
DRB 3 supports Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007 with protocols incl.
SAE J1850 PWM (FORD)
SAE J1850 VPW
SAE J2610 SCI (CHRYSLER)
ISO 15765 (Network Transport Protocol)
ISO 11898 (High Speed CAN)
ISO 14230 (Keyword2000)
ISO 9141/9141-2 (K-Line)
Chrysler Collision Detection Bus (CCD)
drb3-car-list
http://blog.obdii365.com/2018/06/26/drb-iii-emulator-download-free-for-micropod-2-clone/

Where to get a decent wiTech Micropod 2 clone?

This is for those who are looking for a decent wiTech Micropod 2 China clone.
witech-micropod2
It’s the best quality of Micropod 2 clone SP271-C1, quality as good as VCM2 clone SP177-C1.
BUT, WHY IT IS THE BEST QUALITY MICROPOD 2 FROM CHINA?
First, this Micropod 2 SP271-C1 can be connected to the NETWORK and NEVER LOCKED!
You could use the clone for ONLINE DIAGNOSIS for NEW CHRYSLER CARS.
If you have an account, you also are able to do ONLINE PROGRAMMING.
Second, the wiTech Micropod2 SP271-C1 is confirmed to WORK NO ISSUES WITH DRBIII EMULATOR as well as the original Micropod 2.
This is a test report from our customer @rcompart and it’s verified to get DRBIII with the clone Micropod 2. And, it’s kind of him share the tutorial in detail with you guys.
All can be found here:
With DRBIII emulator, you can have your Micropod 2 for old Chysler the year 1997 – 2004 (2005)
Without DRBIII, Micropod 2 clone only works for Chrysler made after the year 2003
That is, you have a way for old Chrysler with a cloned Micropod 2 unit.
Third, wiTech software is confirmed also no issues with this Micropod2.
It’s tested 100% by real professionals working for obdii365.com
Note: what is DRB3 and what’s wiTech? What’s the main difference The DRB3 emulator is part of Chrysler’s Witech software. The Witech software supports two different pass-through devices, The VCI pod which is sold with the Witech system and the Chrysler Starmobile. The DRB3 emulator is a convenience item for dealerships to allow the use of their current witech scan-tool on older non CAN bus vehicles. It is not by any means a cost saving option.
The last, PCB talks a lot
That’s all. Hope it’s helpful to you all.
http://obdii365.blogspot.com/2018/06/why-you-should-have-micropod-2-clone.html

Download and Setup wiTech MicroPod 2 V17.04.27 on Windows 7

Free download wiTech MicroPod 2 V17.04.27 Chrysler Jeep Dodge diagnostic software crack, then install on windows 7 32 bit or 64 bit for use.
wiTech 17.04.17 software crack download on Mega: worked on windows 7 32 bit or 64 bit
wiTech 17.04.17 java air download: necessary used with wiTech software v17
wiTech software v17.04.17 only work with MicroPod 2 clone with item no.sp271-c:
wiTech MicroPod system requirement:
Recommended hardware:
System type: laptop or tablet
Processor: intel i7 – 630M dual core 2.66GHz or better
HDD space: 80GB
Memory: 4GB
Operation system: Windows 7 professional 32 bit or 64 bit
Network adapter: 10/100 wired, 802.22g wireless
Monitor: 1920*1080 resolution
Minimum hardware:
System type: laptop or tablet
Processor: intel i5 – 520M dual core 2.4GHz or equivalent
HDD space: 40GB
Memory: 2GB
Operation system: Windows 7 professional 32 bit or 64 bit
Network adapter: 10/100 wired, 802.22g wireless
Monitor: 1024*768 resolution
Software:
Adobe air: version 3.10 or newer
Java: 1.6.0_21 or newer
Adobe reader: 9.0 or newer
Internet explorer: 8.0 or newer
SVG viewer: 3.0
wiTech MicroPod 2 V17.04.27 Windows 7 32/64bit install:
Open disk E: wiTech V17.04.27, then read the PDF “readme”, wiTech MicroPod II installation manual attached
install-witech-micropod-1
First, install AdobeAIRInstaller.exeAccept the agreement
Installing…
Adobe air installation completed.
install-witech-micropod-2
Second, Install jre-6u45-windows-i586.exe(Update Later: an update to Adobe air)
Click on Install to accept the lience agreement
Installing Java…
Have successfully installed Java
install-witech-micropod-3
Third, install wiTECH_Install_17.04.27.exeselect a setup language
install-witech-micropod-4
wiTECH system requires the following items installed on your computer:
Microsoft visual c++ 2010 or later redistributable package (x86)
Enlang 5.8.4.2
Java standard edition 7 update 25
install-witech-micropod-5
Installing wiTECH…
install-witech-micropod-6
install-witech-micropod-7
install-witech-micropod-8
install-witech-micropod-9
install-witech-micropod-10
install-witech-micropod-11
Have successfully installed wiTECH 17.04.27
Windows security alert: allow access
Fourth, restart the computer
Installing device driver software…
Local network connection: work network
Device is ready for use
install-witech-micropod-12
Setup in driver Computer management: select CDCECM Ethernet Adapter
install-witech-micropod-13
WARNING for MicroPod 2 Setup:
1 The computer on the day of the date
2 The computer must be connected to the Internet
3 Connect the machine to the device and open the Chrysler wiTECH software
Done!
Now, wiTECH diagnostic application is ready for use.
It’s wiTECH version 17.04.27
install-witech-micropod-14
wiTech MicroPod II login: no need user id and password
wiTECH 17.04.27 works offline
install-witech-micropod-15
wiTECH 17.04.27 supports 2017 models
install-witech-micropod-16
Vehicle id: 2017 WD, has been successfully identified
install-witech-micropod-17
Go to vehicle diagnostics and programming.
install-witech-micropod-18
Enjoy!

wiTECH MicroPod II v17.03.10 review: Dodge Avenger 2014 OK

Just ordered a Chinese clone wiTech MicroPod II Chrysler diagnostic tool and it has been working exactly like an OEM unit. No errors so far and tested functions on 3 different vehicles. It has been confirmed working with unmodified software wiTECH v17.03.10 (downloaded directly from a blog, I put the site below) and online (logged into TechAuthority). Not sure if it will be blacklisted or the firmware will be upgradeable with the next software release, but for now it works fine.

I have also uploaded pictures of the internals for those who are curious.

MicropodClone3

MicropodClone2

MicropodClone1

MicropodClone4

MicropodClone5

The site I am using for this tool:

http://www.obdii365.com/wholesale/witech-micropod-2-diagnostic-programming-tool.html

wiTECH v17.03.10 download from:

http://blog.obdii365.com/2017/03/06/free-download-v17-03-01-witech-micropod-2-for-chrysler/

 

This version of Witech (17.03.10) works fine on Windows 7 and Windows 10.

 

on a 2014 Dodge Avenger just fine.

 

was able to flash a module update & program a new key with the unit

 

also, possible to use DRB III Emulator with it, DRB III emulator confirmed working.

 

So far, happy with this witech MicroPod 2.

http://blog.obdii365.com/2017/05/04/witech-micropod-ii-review-dodge-avenger-2014-ok/

Genuine vs. HQ Clone wiTech Micropod 2 Chrysler Scanner

Here’s a comparison chart of genuine vs. clone witech micropod 2 system, incl. High-quality witech micropod system vs. bad micropod 2 china clone.
Genuine WiTech Micropod2 vs. Clone wiTech Micropod II
witech-micropod-original-vs-clone-1
witech-micropod-original-vs-clone-2
witech-micropod-original-vs-clone-3
witech-micropod-original-vs-clone-4
witech micropod2 for sale:
witech-micropod-ii
– the copy is 1:1 of the genuine, of high quality and good stability, its connector matches the car OBD plug perfectly.
– With high-quality USB cable which transfer data stably and reliably
– The package is anti-static, moisture-proof, anti-electromagnetic interference
– Workable with your current wiTECH software
– No smart cables required
– No drivers needed
micropod 2 ebay?
Ebay should be a good place to buy items. But for professional vehicle diagnostic tools, a site with experienced experts and technical support teams like http://www.obdii365.com/
witech micropod 2 price:
Original micropod 2: $4599 around
Clone micropod 2: $179 – $525, depends on quality
Note: MicroPod 2 (Item. No SP271-B) is the best quality one among china clones, same as the original.
witech micropod II HQ Clone Customer Review:Just ordered a chinese clone MicroPod II and it has been working exactly like an OEM unit. No errors so far and tested functions on 3 different vehicles. It has been confirmed working with unmodified software wiTECH v17.03.10 (downloaded directly from Chrysler). For now it works fine.
I have tested Dodge also. I just used it on a 2014 dodge avenger just fine. I am able to flash a module update and program a new key with the unit.
I don’t have experience with Windows XP. This version of Witech works fine on Windows 7 and Windows 10.
I have also uploaded pictures of the internals for those who are curious.
witech-micropod-2-clone-pcb-1
witech-micropod-2-clone-pcb-2
witech-micropod-2-clone-pcb-3
witech-micropod-2-clone-pcb-4
witech-micropod-2-clone-pcb-5
witech software download: