Tag Archives: vxdiag vcx nano

JLR Diagnostic: DOIP VCI or VXDIAG VCX NANO?

Topic: What Jaguar Land Rover diagnostic tool can work for Land Rover the 2017 year? VXDIAG VCX NANO for JLR Land Rover with SDD or JLR DOIP VCI with Pathfinder?

 

The answer is: BOTH OK. Both work for the 2017 Land Rover.

VXDIAG-VCX-NANO-Land-rover-vs-JLR-DoIP-VCI

First, JLR DOIP VCI diagnostic tool running Pathfinder software

Not released yet!

JLR DOIP VCI running Pathfinder software works for Land Rover the 2017 year.

 

JLR DOIP VCI how much do you know?

 

What is JLR DOIP:

 

This is a unit compatible with Pathfinder and all JLR vehicles with new vehicle architectures (from Range Rover/Range Rover Sports (L405/L494) 17 MY onwards) or allow the enhanced diagnostics that Pathfinder will offer the retailer. In addition to the 17MY vehicle line application, the DoIP VCI will be capable of interfacing with the 14-16MY Multi-CAN architecture vehicle lines on the Pathfinder diagnostic system. Pre-14MY and vehicles not detailed here will continue to use the current diagnostic system and VCIs.

 

How to use Pathfinder software to read/clear fault codes:

 

Vehicle: Land Rover Range Rover L405 2007

 

Procedure:

 

Run Pathfinder

JLR-DOIP-VCI-with-Pathfinder-download-(1)

Enter user name and password to log in

JLR-DOIP-VCI-with-Pathfinder-download-(2)

Warnings:

To use this maintenance tool, you should agree with items below:

– you’ve already read Garage Maintenance User Guide, the first section “Basic information”

– know how to use this tool to perform PDI, maintenance, diagnostics, etc.

– only used for Jaguar Land Rover vehicles

– finish junior training of JLR diagnostic tools

– obey laws & rules of vehicle health and security in your areas

– obey all policies & procedures of the dealer repairing

JLR-DOIP-VCI-with-Pathfinder-download-(4)

Search your vehicle via VIN

JLR-DOIP-VCI-with-Pathfinder-download-(3)

Auto scan

JLR-DOIP-VCI-with-Pathfinder-download-(5)

JLR-DOIP-VCI-with-Pathfinder-download-(6)

Automatic ignition switch not supported

Click on OK

JLR-DOIP-VCI-with-Pathfinder-download-(7)

Vehicle information:

Land Rover Range Rover L405 (DoIP)

VIN: XXXXXXXX

YEAR: 2007

MILEAGE: 5804km

ENGINE: 306DT – V6 3.0 DIESEL

TRANSMISSION: Automatic

DRIVER: LHD (left-hand driver)

TYPE: 5 DOOR STATION WAGON

ACCESSORY: STANDARD

JLR-DOIP-VCI-with-Pathfinder-download-(8)

Go to ECU Diagnostics

Reading fault codes

JLR-DOIP-VCI-with-Pathfinder-download-(11)

JLR-DOIP-VCI-with-Pathfinder-download-(12)

 

Read All DTCs

JLR-DOIP-VCI-with-Pathfinder-download-(13)

Go to clear all DTCs

JLR-DOIP-VCI-with-Pathfinder-download-(14)

JLR-DOIP-VCI-with-Pathfinder-download-(15)

JLR-DOIP-VCI-with-Pathfinder-download-(16)

Then refresh DTCs

JLR-DOIP-VCI-with-Pathfinder-download-(17)

Done!

 

What vehicles that DoIP VCI clone works with: (14-16MY)

XE (X760)

F-Pace (X761)

F-Type (X152)

XF (X260)

XJ (X351) – 16MY only

Evoque (L538)

Discovery Sport (L550)

Range Rover (L405)

Range Rover Sport (L494)

 

Disclaimer: All about JLR DOIP VCI and Pathfinder here is China clone version. For original DOIP VCI, forget it.

 

Second, VXDIAG VCX NANO for Jaguar/Land Rover running SDD V145:

Released!

Obdii diagnostics, ECU programming…Works great!

 

 

What is VXDIAG VCX NANO Jaguar/Land Rover:

It’s an auto diagnostic/programming tool made by Allscanner, used for Jaguar/Land Rover cars to do basic obdii diagnostic and ECU programming.

 

 

How to use VXDIAG VCX NANO for Land Rover diagnostics:

 

Run JLR SDD, then click “SDD” to Login.

VXDIAG-VCX-NANO-Land-rover-1

After you see “The SPX – I – VIEW is connected” at the right corner, click “Continue”

VXDIAG-VCX-NANO-Land-rover-2

Auto VIN Read

VXDIAG-VCX-NANO-Land-rover-3

VXDIAG-VCX-NANO-Land-rover-4

Go to Diagnose

VXDIAG-VCX-NANO-Land-rover-5

Select symptom, SDD covers Chassis, power train, electrical and body

Here: select Powertrain – Engine system – Engine cooling, then click “Continue” to identify recommendations for selected symptoms.

VXDIAG-VCX-NANO-Land-rover-6

After complete identifying recommendations for selected symptoms, click on “Diagnose”.

VXDIAG-VCX-NANO-Land-rover-7

Click on “Diagnose”, select Powertrain – Engine system – Engine cooling, then click “Continue” to load recommended candidates.

VXDIAG-VCX-NANO-Land-rover-8

Select market specification, click “Save”, then go to analysing data…

VXDIAG-VCX-NANO-Land-rover-9

VXDIAG-VCX-NANO-Land-rover-10

Find out “Complete Vehicle – Clear all stored diagnostic trouble codes.”, click on “Run”

VXDIAG-VCX-NANO-Land-rover-11

Pop up “Ignition On Check”, click on “Continue”

VXDIAG-VCX-NANO-Land-rover-12

Clearing DTC.

VXDIAG-VCX-NANO-Land-rover-13

Get operation tips, continue

VXDIAG-VCX-NANO-Land-rover-14

Back to the menu, and select “Session”, then click on the “refresh” Icon

VXDIAG-VCX-NANO-Land-rover-15

VXDIAG-VCX-NANO-Land-rover-16

Click “DTCs” to view fault codes read from vehicle.

 

 

Vxdiag Vcx Nano JLR car list:

Support Jaguar and Land Rover from 2005 to 2017

Land Rover: L316, L319, L320, L322, L359, L405,L494, L550, L538 vehicle lines

Jaguar: X100, X150, X152, X202, X250, X350, X351, X400 vehicle lines

 

 

Again, JLR DOIP VCI is not released yet. If you need have a diagnostic test or ecu programming for your JLR, please go to Vxdiag Vcx Nano Land Rover. The site might wok great for you: http://www.obdii365.com/wholesale/vxdiag-vcx-nano-for-land-rover-and-jaguar.html

5 Steps to set up VXDIAG VCX NANO Cloud Diagnosis

VXDIAG VCX NANO series scanners (Ford/Mazda IDS, GM/Opel GDS2,JLR SDD,VAG ODIS,Toyota Techstream) has developed “Cloud Diagnosis” function without installing software.

What is Cloud Diagnosis?
-That means you do not need to install the software, you just need to install the VX Manger, then you can start to do the diagnosis!

Operating system:

Recommended using Microsoft WIN7 or higher system. Computers are required to

install the Microsoft IE11 or Google browser. Android and IOS systems are not supported

How to set up VXIDAG Cloud Diagnosis?

1.Installation of VXDIAG device driver management“VX MANAGER”;

Accept license agreement

Here nothing to choose, directly click on “NEXT” go down:

2.Connected to the VXDIAG diagnostic equipment, the computer automatically install the driver;

3.The driver installed after open the “VX MANAGER”, select the top menu VX CLOUD”;

Click and open “start cloud diagnostics” will automatically open the default browser, enter the cloud diagnostics enter the dealer to the account and password;

4.Select the required models in the main interface Icon;

Select “Open Cloud diagnostics” and enter the cloud server(Note: to enter the cloud server must be connected to the device);

Here we take VXDIAG VCX NANO Ford/Mazda IDS software as an example

5.Open diagnostic software for vehicle diagnosis

How to use VXDIAG VCX NANO Cloud Diagnosis function?

https://youtu.be/d1aT_E6pTyM

 

http://vxdiag.blogspot.com/2016/10/set-up-vxdiag-vcx-nano-cloud-diagnosis.html

VXDIAG GM GDS2 “Manager Initialization Error”

Here is the solution to VXDIAG VCX NANO for GM/Opel GM MDI Manager Initialization Error.
Problem:

I have a new VXDIAG VCX NANO for GM.
It worked yesterday with Saab 9-5 2006 (9.250 bin, with problems but it can read trouble codes and make some config).
Today I want to make a clean installation on VMware with Windows XP image.
After installation I can not run GM MDI Manager.
1. If I choose UNINSTALL in “MDI Select” I can open MDI Manager and manager can not find any interface. (drivers installed properly)
I have only “Not connected to MDI”.
2. If I choose INSTALL – I have an error.
“Manager Initialization Error [Failed to initialize Vetronix Runtime rc = -5]”
Also I don`t have any table with interface option to choose at the start of Tech2Win.
(because MDI Manager didn`t find pluged any interface?)
I can find VCX Nano and configure with VX Manager.

vxdiag-gm-mdi-error
Solution:

If your running in VM make sure your OS didn’t connect to it via wifi etc. You want your VM to set up the drivers not the primary OS. If it did just disconnect in primary OS on network and try again in VM.

Please refer to the following:
Tech2Win Install(WIN XP or WIN 7)
——————–
1. Run Tech2Win\AutoInstall.exe, Everything will be done.
2. install VX Manager.
3. Open VX Manager, install GM Driver.

Running GDS2 with VMWare
——————–
1. Install VMware-player-6.0.6-2700073.exe
2. copy GDS2 VM to harddisk.
3. open GDS2 VM with VMware Player

Video instruction:
How to install VXDIAG VCX NANO GM GDS2

How to install VXDIAG for GM Tech2Win 11.27