Tag Archives: Volvo 88890300 Vocom

Which PTT Version can do Volvo B7R B9R B11R B12R?

This blog here will answer you this question: Which PTT Premium Tech Tool can diagnose Volvo B7R B9R B11R B12R bus? And which tool to use?

Check professional answer as below:

 

Some guys tested that Volvo PTT 2.04.87 diagnose Volvo B11R and B12R buses OK. Is that true?

Yes. To diagnose Volvo Bus B7R, B9R, B11R and B12R bus you can use Volvo PTT 2.04.87 and newly released Volvo PTT 2.5.75! (Technicians from obdii365.com confirmed that)

volvo-ptt-2-05-75-tech-tool-software-1

Volvo Tech Tool 2.05.75 What’s new?

Special Login id and own Info

Lasted Apci+ Update

Volvo Trucks (Older electrical system, Vehicle electrical system ’98);

Volvo Trucks (Version2, Version3 Parameter Programming);

Volvo Trucks (Version4 FH4/FM4 Parameter Programming);

Volvo Buses (Conventional, Multiplexed, Multiplexed V2, Multiplexed V3 [/b]);

Volvo Construction Equipment Parameter Programming;

Volvo Penta (Version2, Version3);

Volvo OEM Component Customer (Version2, Version3);

Mack Trucks (V-MAC I/II/III, ITC, IV, IV+) Parameter Programming);

Renault Trucks (Version2, Version3, Version4) Parameter Programming;

UD Trucks (Version2, Version3,Version4) Parameter Programming;

 

Which tool can work with Volvo PTT 2.04.87 or Volvo PTT 2.5.75?

Note: Both Volvo PTT 2.04.87 and Volvo PTT 2.5.75 software are tested 100% working with Volvo VOCOM and VCADS VOCOM.

Volvo 88890300 VOCOM Interface

88890300-volvo-vocom-interface-for-volvo-renault-ud-mack-2

VCADS Volvo 88890300 VOCOM

vcads-volvo-88890300-vocom-interface-3

http://blog.obdii365.com/2017/05/18/which-ptt-to-diagnose-volvo-bus-b7r-b9r/

5 steps to set up Volvo VOCOM 88890300 WiFi

Here is the manual on how to set up WIFI for Volvo 88890300 Vocom Interface forVolvo/Renault/UD/Mack truck diagnosis scanner.

 

Before wifi setup, users had better have a basic understanding of Vocom cables.

There are 5 cables for vocom communication unit:

1 pc x   OBD2 cable

1 pc x   8pin cable

1 pc x   14pin cable

1 pc x   12pin cable for Renault trucks

1 pc x    USB cable

vocom-88890300-wifi-usb-cable

This exactly is the USB cable that connects the Volvo VOCOM adapter to the PC.

 

Before wifi setup, please make sure you have successfully installed volvo vocom 88890300 software, vocom 88890300 driver, Tech Tool. And the device is working:

vocom-88890300-device-working

How to set up wifi for vocom 8889300 communication unit.

  1. use USB cable , go to Premium Pech Tool (PTT) , setting, Communication unit configuration , configure, ‘USB+Directly to Communication unit’

vocom-8889300-wifi-setup-(1)

vocom-8889300-wifi-setup-(2)

vocom-8889300-wifi-setup-(3)

  1. ‘Direct’ ->’Restore default values’-‘Apply’-‘Ok’

vocom-8889300-wifi-setup-(4)

vocom-8889300-wifi-setup-(5)

3. Click Ok again, then disconnect usb cable

vocom-8889300-wifi-setup-(6)

  1. go to Setting->’Comm.unit Selection’ -. ‘ Communication unit 8889300 ….Nickname’

vocom-8889300-wifi-setup-(7)

vocom-8889300-wifi-setup-(8)

vocom-8889300-wifi-setup-(9)

  1. now your can use signal get wireless signal.

 

All ok!

 

 

NOTE of VOCOM adapter connection:

If you are experiencing connection issues, control unit mismatches, incorrect model or electrical system populate, or operations for that vehicle are missing, do the following. Disconnect the adapter from the truck and PC for at least 2 minutes. Click “Finish Work” on the product page in Tech tool. Go to the “Latest selections” list and remove the VIN you are having the issue with. Power cycle the truck for at least 10 seconds. Now re-connect to the truck.Usually, the issue will be solved.

 

Note: Volvo Vocom interface Item # SH56 in obdii365.com does not support WiFi, only Item # SH56-B support Wifi connection.

http://blog.obdii365.com/2016/11/24/volvo-88890300-vocom-wifi-setting-manual/