Tag Archives: vas5054a

How to make vas 5054a work with Xentry PassThru

Something good to help you to make Xentry PassThru on Windows 10 x64 support new Mercedes models (Euro5/6, W205, W213, W222). Done with VAS5054A PassThru Driver
Xentry PassThru needs to be installed on Windows x64 to support new models, such as Euro5/6, W205, W213, W222 … However, VAS5054A didn’t work on 64bits as passthru. There is 64bits device driver for VAS5054A but there is no PassThru driver working on 64bits. You may try Actia driver instead but this is a patched 32bits PassThru API files with 64bit device drivers working on Windows 10 x64. Xentry recognizes it and works with W205 (confirmed), etc.

WARNING: Use it on your own risk, only for test purpose.
What you need:
(1) VAS5054A Bluetooth hardware. (genuine and good clone… both ok)
(2) (option) VAS5054A EDIC_PDU_API 1.20.4x driver installation file. You can find it somewhere on this forum.
(3) (option) New firmware. The firmware included here is version 1.20.41 for better compatibility, not 1.20.42.
(4) Softing_VAS5054A_PassThru_Driver_x64_v3.zip (attached here)
(5) 64bit Windows 10
(6) (option) DC 12V power adapter, 2 jumper wires for temporary power.
Pre Installation:
(1) Install Xentry PassThru and do all patches.
(2) (option) Install EDIC_PDU_API 1_20_42 driver (or EDIC_PDU_API 1_20_41). It’s for installing .NET framework or VC++ redistribution files.
If you are going to do clean install on fresh Windows 10, you might want to install the EDIC_PDU driver first. It installs .NET framework, VC++ files, some EDIC DLLs on /Windows/System32 or SysWow64. Other files will be overwritten by the below manual installation. 
Installation:
(1) Copy “Program Files (x86)\Softing\*” to your HDD “C:\Program Files (x86)\Softing\*”
(2) Copy “Program Data\D-PDU API” to your HDD “C:\Program Data\D-PDU API”.
(3) Double click on “Softing_VAS5054A_PassThru_1_20_042.reg” and install it.
(4) Make a shortcut of “SftngCM.exe” on Desktop.
(5) Right click on “C:\Program Files (x86)\Softing\EdicDriver\win7\softingedic7_ntamd64.inf” and install.
(6) Connect the VAS5054A hardware using an USB cable. Connect it to a temporary power(12V DC adapter) or OBD-2 port.
(7) Check “Control Panel/Devices Manager/Softing…”. If not installed correctly, update the device driver manually.
(8) Make a shortcut of “EDICConfig.exe” on Desktop.
(9) (option) If you have newer version than EDIC_PDU_API 1_20_42 driver and genuine VAS5054A hardware, you may install the API driver now.
Post Installation:
(1) Connect the VAS 5054a to a temporary power(12V DC adapter) or ODB-2 port.
(2) Run “SftngCM.exe” on desktop as administrator. Make a “C:\Temp” directory if not exists. This is for saving log files. If not exists, SftingCM.exe will cause error when doing test.
(3) Choose “VAS5054A” and type the serial number (maybe 0821xxxxx).
(4) Select “Test” and click on “Start Test”.
– RED dot : PC <-> VAS5054A does not communicate. Something wrong on your driver.
– YELLOW dot : PC <-> VAS5054A communicates.
– GREEN dot : PC <-> VAS5054A <-> Vehicle communicates.
Tip:
(1) “.NET Framework 2.0/3.0/3.5” needs to be installed if not installed automatically. You can install it by selecting on “Control Panel/Programs and Features/Turn Windows features on or off/.NET Framework 3.5(includes .NET 2.0 and 3.0)”. You also need to install VC++ redistributions if not done yet. (MSVCR100.dll, mfc100.dll, … errors)
(2) Temporary power to VAS5054A for test purpose : Ground to either pin 4 or 5. 12V DC to pin 16.
(3) You can upgrade the EDICDriver in “Program Files (x86)\Softing\EDICDriver” if you have newer version. Update the device driver on control panel.
(4) If you installed newer version EDIC_PDU_API driver than 1.20.42, edit the *.reg and change the number 1_20_42 to your number (for example, “EDIC_D_PDU_API_1_20_042” to “EDIC_D_PDU_API_1_20_0XX”). After editing, double click on it and install it again.
(5) If your device has different serial number but SftngCM.exe doesn’t allow the change, edit the *.reg file with text editor, double click on it and install it again.
vas5054a-driver-for-win7
Download:
Softing_VAS5054A_PassThru_Driver_x64_v3.zip
http://blog.obdii365.com/2019/03/10/make-xentry-passthru-work-for-new-models/

Which VAS 5054A hardware work with ODIS 4.4.10?

Here is my story of Odis 4.4.10.
Link: thanks to GUSS shared links at cartechnology.co.uk
Vas 5054a and odis 4.4.10:
One of my 2 vas5054a has original amb2300 but does not work with odis-s 4.4.10.
I get a ODS2522E that hardware is not supported. (same as the one without original amb2300)
I have tested amb2300 with softing edic configuration manager. Also tested with PDU api application. All tests ok. Configurator manager did not work with vas5054a without amb2300
vas-5054a-odis-v4.4.1-error-1

 

vas-5054a-odis-v4.4.1-error-2
Then, tested working PDU api and tried to solves the issue however I am not happy with the result. In theory original amb2300 should work.
Tests:1. 1.20.41 does not work at all with either of my 2 interfaces. So back to 1.20.42
2. Enabled buzzer just to check that my amb2300 is original. Enabled.
3. Tried to connect with bluetooth (amb2300 interface). Laptop connected successfully. Tried to connect odis-s with car and started buzzing continuously and then an error appeared, buzz continued.
In English
there is no mcd project available
I am ditching odis-4.4.10.
Before 4.2.3 test will test 4.3.3 to check if that works, in order to check if the problem is hardware or software.
vas-5054a-odis-v4.4.1-error-3
Then i was advised to make another folder Softing.ori  put ther new Pdu:
vas-5054a-odis-v4.4.1-error-solution-1

 

vas-5054a-odis-v4.4.1-error-solution-2

 

vas-5054a-odis-v4.4.1-error-solution-3

 

vas-5054a-odis-v4.4.1-error-solution-4

 

vas-5054a-odis-v4.4.1-error-solution-5
Did not work but good try. That made me think that PDU API is the problem.
However found out that VW has locked the D-PDU API directory location (or file names) and managed to install at the 1.20.042 location the 1.20.041 pdu api and renamed 3 files to …..1.20.042 (2 xml 1 dll same as DPDU api test application 3 files mentioned).
now it works, actually tested just vas5054a with fake bluetooth and works.
This is not a straight forward procedure, however after manipulation of D-pdu api (1.20.042 vecom, the 3 files) odis 4.4.10 works.
My amb2300 is original since I have downgraded it to 1.20.041 firmware (with the D-PDU API) test application) however it does not work out of the box with odis 4.4.10. Will test the second one tomorrow.
My conclusion:
First, that pdu api directory (file name) is locked.
Second, amb2300 original does  not work as tested. (problem with 1.20.042 pdu API driver specifically Softing/1.20.042/VeCom/VAS5054a files as seen in second solution below).
Other solutions:
1. Test the PDU API 1.20.042 found in odis 4.3.3 (check pdu_api_root.xml is correct 1.20.042)
2. Want to test original 1.20.042 but to replace in vecom vas5054 folder from 1.20.041 folder. (No other changes, check again pdu_api_root.xml is for 1.20.042 )
Test performed:1. Tested second vas5054a with original amb2300. All tests with usb and bluetooth pass with first solution above. Note in this test I used amb2300 firmware 1.20.041 since I used pdu api 1.20.041 renamed folder to 1.20.042 and 3 files to 1.20.042 as discussed above. Bluetooth works too.
2. Second solution tested with original amb2300. (not tested with clone but most probably will work)
b) reinstall pdu api 1.20.042 pdu api
b) Replace vas5054 folder (from 1.20.041) in softing/1.20.042/vecom/vas5054.
c) update amb2300 firmware to 1.20.042 (this is the difference from solution 1) since I used pdu api 1.20.042.
d) Both usb and bluetooth work. Amazing… I have original amb2300 (but with fake serial number).
vas-5054a-odis-v4.4.1-success
Recommendation:
For newbies, i suggest tested odis from a reliable source: http://www.obdii365.com/wholesale/new-odis-5054a-u-disk.html
The files are full
No need search for launcher, license…and NEVER expired
It’s tested 100% by real pros and confirmed to work no issues
Also, remote help can be got if you have any issue of installation
Enjoy!

FAQ VAS5054A ODIS 4.2.3 Software Installation

The write-up here of VAG diagnostic software ODIS-S 4.2.3 installation tutorial includes 2 parts:
– ODIS 4.2.3 installation issues and solutions
– ODIS 4.2.3 installation suggestion
First, ODIS 4.2.3 installation FAQs
Q: is it possible to user interface VAS 5054A with Odis 4.2.3
A: Win7 yes. in Win10 it is not supported in 4.2.3
Q: anyone has good success with odis 4.2.3 with 5054a head?
A: Yes, my VAS5054A works fine with Odis Service 4.2.3 and Odis Eng 7.7.2 on Windows 7 32 bit.
Bluetooth and USB connection works fine!
Q: When i try to open PostSetup folder”, don’t recognize the folder:
“No valid software configuration could be found at the specified URL. Please select different URL.”
What can i do ?
A: use search button
Q: I search but don’t see regarding PostSetup, i see only for Windows Error.
A: FOLGER “Odis” or file:/D:/PostSetup/
Q: post setup unable to complete
A: usually 2-3 reason for failure on postsetup
1. not enough space on hdd
2. did not meet update requirements (prerequisites)
3. corrupted download.
Q: Where to get working ODIS 4.2.3?
It’s working perfect on win7 x64.
Q: ODIS 4.2.3 on Windows 7 32 bit popped up error ODS9006E: Infrastructure VW online connection. MirrorServer 2: The update requires Administrator rights. Please log in as Administrator and perform update.
odis-ods9006e-error
A: Run it as administrator it will work
Q: my odis 4.2.3 has ERROR KB3033929 AND KB2921916
odis-error-kb3033929
A: You need 2 updates you can see in your picture KB3033929 AND KB2921916 select if the system is 86 or 64
Q: ODIS 4.2.3 Problem :“Framework start failed with 13
If i would start Odis i become this answer in a little Popup with red Button.
I would use it on Windows 8.1
Can anyone help me?
odis-framework-start-failed
A: The solution is to use it on Win 7 64-bit when using VAS5054a
Second, odis 4.2.3 installation advice/suggestion
No need any special settings
After install, connect your vas5054a in OBD and USB, install driver.
Open your Odis! All will work
Odis 4.2.3 Windows 7:
I will prefer you to use windows 7 for all the diagnostic devices, this is because of the security of the windows 10. The best way to get a good working diagnostic program is to have one and only laptop for this. A clean windows 7 is the best way.
Have a try on Win 7 32 bit and 64. both have the luck
32bit: x86 is soooo much better since there is no any lack of the functionality for any kind of driver of ur laptop , I test both x86 is better and u can install both yes ODIS-S and ODIS-E
64 bit: I installed on win7 64bit and it installed and I added the update file from the download, starts and works very well
Odis 4.2.3 Windows 10:
Windows 10 only supports the new diagnostic interface VAS 6154 wifi interface(known as the WLAN remote head). Users of the older models VAS 5054 Bluetooth scanner, VAS 5054A and VAS 5055 can continue to use the Windows 7 i.do client on existing systems until 2019 or acquire the Windows 7 i.do. client from IT Client Support for replacement devices. The new diagnostic interface can be used with both operating systems. Please place any necessary orders with Workshop.

WiFi VAS6154 vs. Bluetooth VAS 5054A VAG Scanner

VAG diagnostic tool Wifi VAS6154 differs from Bluetooth VAS 5054a interface at outlook, PCB, communication method, vehicle coverage, programming, etc, and they share same software version ODIS 4.1.3.

 

Here we go in details.

 

Part 1. The differences:

1) Wifi VAS6154 Outlook VS Bluetooth VAS5054 outlook

vas6154-outlook-vs-bluetooth-vas5054-outlook-01

vas6154-outlook-vs-bluetooth-vas5054-outlook-02

vas6154-outlook-vs-bluetooth-vas5054-outlook-03

2) Firmware / PCB: VAS6154 has a upgraded hardware compare with VAS 5054A.

 

Attach best Quality VAS 5054A PCB (SP33-C)

best-quality-vas-5054a-odis-diagnostic-tool-pcb-04

best-quality-vas-5054a-odis-diagnostic-tool-pcb-05

Attach Wifi VAS6154 PCB (Built with wireless network technology):

vas6154-vag-diagnostic-tool-07

Usually VAS6154 can communicate via wireless network and USB module.

But in some countries the user can only use VAS6154 by pluging USB to the car, since in these contries the wireless network module can not be permitted, they are: Australia, Bosnia and Herzegovina, Brazil, Canada, Switzerland, Cyprus, Czech, Danmark, Estonia, Finland, Greece, Hongkong, Israel , India, Ireland, Italy, Lativia, Mexico, Netherland, New Zealand, Poland, Russia, Argentina, Korea, Singapore, SLOVENIA, Turkish, Ukraine, UAE, the United States, the United Kingdom.

 

3) Communication method:

VAS 6154a communicate via USB or Wifi

VAS5054a communicate via USB or Bluetooth

Attach VAS5054a Bluetooth adapter

5054a-bluetooth-adapter-06

4) Vehicle coverage:

VAS6154 vehicle coverage: VW Audi Skoda cars since 2000 year.

 

VAS 5054 vehicle coverage: VW Audi Skoda Seat Bentley Lamborghini (only VAS5054A interface VAS-PC V19 software is compatible with Seat Bentley Lamborghini).

 

 

5) Remote programming:

To use VAS-PC software to perform remote programming, you go for VAS5054A or VAS5055 head is good choice.

To perform OBDII diagnostic and online programming, you go for VAS 6154 head clone.

vas6154-package-1

Part 2. The similarities:

Newest crack ODIS 4.13 is compatible with both VAS 6154 interface and VAS 5054A interface.

 

1). ODIS 4.1.3 Software what works:

 

– Estimated remaining times are shown for ECU flash operations.

 

– Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view,

 

used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests

 

– The measured value display has been improved.

 

– Documents in GFF are displayed in separate windows.

 

– One message box will be shown at the beginning of the test drive mode.

 

– GFF hotfixes can be integrated during diagnostic sessions.

 

– Danger messages have been revised.

 

– Stopping of diagnostic sessions may be interrupted.

 

– Automatic deletion of autosave diagnostic protocols after successful transmission.

 

– Selection of PassThru diagnostic hardware has been improved.

 

– ODIS Service Software update has been stabilized.

odis-4.1.3-05

odis-4.1.3-04

odis-4.1.3-03

odis-4.1.3-02

2) ODIS 4.13 is Multilanguage available:

English, Japanese, Portuguese, Romanian, Korean, Dutch, Polish, Turkish, Spanish, French, Italian, Croatian, Danish, German, Swedish, Finnish, Slovenian, Czech, Russian, Greek, Chinese.

v3_0_1-software-language-choose-08

3) ODIS 4.1.3 installation
https://youtu.be/oc2N8Kv4A3U

That’s all.

www.obdii365.com

Free VAS 5054A ODIS-E 6.7.5 and Installation Guide

VAG diagnostic software ODIS engineering version ODIS-E 6.7.5 has been tested working perfectly. Here are the free download and installation instructions by obdii365.com engineer.

 

Version: ODIS-E 6.7.5; Postsetup 67.5.10

Language:Dutch,English,Czech, Spanish, French, Chinese

Compatible device: VAS 5054A Bluetooth interface, VAS 5054A Plus

Operating system: Windows 7 32bit/64bit; Windows 8.1

odis-675-26

Free Download:

ODIS Engineering 6.7.5  full keygen+Launcher + Postsetup (no password):
ODIS Engineering 6.7.5 Patch:
(key.exe+license.dat+offboarddiaglauncher.exe)

Download ODIS Engineering – ODIS-E 6.7.5 – PostSetup ISO (personal tested)

no password or anything, just doing my part to help.

 

How to install VAS5054A ODIS-E 6.7.5?

Main steps:

Step 1: Install setup assistant

Step 2: Register ODIS-E 6.7.5

Step 3: Download Postsetup

Step 4: Test ODIS Engineering 6.7.5

Step 5: Repair Bluetooth

Step 1: Install Setup Assistant

Change date and time

odis-675-1
Change date to January 1st, 2017 (UTC-8:00) Pacific Time (US & Canada)

Open ODIS-E 6.75 software CD

odis-675-2

Copy 6.7.5 kg-pass 123 zip file to desktop

odis-675-3

Extract zip file on desktop with encrypted password: 123

Delete zip file on desktop

odis-675-4
Copy 6.75 工程师(engineering) folder to desktop and open it

odis-675-5
Open OffboardDiagSetup-Engineering_6_7_5

Select setup language
Install ODIS-E setup assistant
Click on Next
select Target folder
click Next
select a directory C:/ODIS-DIAG-MODULES-ENGIN
click on Next

odis-675-6
select diagnostic interface: VAS 5054

A bluetooth pairing must be established to use the vas5054, click on Next
License file selection

odis-675-7

odis-675-8

search desktop->工程 6.7.5 folder->license.dat
click next
Tick create a folder in the start menu
click Next
installing Offboard Diagnostic Information System Engineering

install Microsoft Visual C++2005

Accept the windows security warning by clicking on Install

odis-675-9
Finish install Setup assistant
Restart the computer

 

Step 2: Register ODIS-E 6.7.5

Delete VW-MCD-PDX-Builder file on desktop

odis-675-10

Start-> All Program-> Offboard Diagnostic Information System Engineering folder ->Send Offboard Diagnostic Information System Engineering software to desktop

odis-675-11

Start-> All Program->Softing D-PDU API for VCIs V1.20.037 folder->send EDIC Configuration Manager to desktop

Right click Offboard Diagnostic Information System on desktop open Properties->Open file location

odis-675-12
Open 工程 6.7.5 folder on desktop

Copy and replace OffboardDiagLauncher on Offboard Diagnostic Information System desktop folder

odis-675-13
Open Offboard Diagnostic Information System software on desktop

odis-675-14
Software will require to enter registration key
Open 工程 6.7.5 folder on desktop
Open key generator

odis-675-15

enter registration name: abc
Copy Hardware ID to key generator and click on Generate

it will generate registration key

odis-675-16
paste the key to software Key area
click Register

 

Step 3: Download Postsetup

open ODIS-E postsetup
select local directory

odis-675-17

C:/Users/AADD/Desktop/6.75 Engineering-> Database->ODIS_Engineering

if software prompt “no valid software configuration could be found”, select the  destination

odis-675-18

C:/Users/AADD/Desktop/6.75 Engineering-> Database
click next
select Postsetup language

odis-675-19
check postsetup version:67.5.10
Press next icon to download postsetup

download completed will launch software automatically

 

Step 4: Test Software

Select Admin->Diagnostic data

odis-675-21
open C:/Users/AADD/Desktop/6.75 Engineering-> diagnostic data->AU (Audi)->ODXUPDATE

odis-675-22

Select LB (Lamborghini, Bentley),SE (Seat),SK (Skoda),VW ODXUPDATE on by one

Connect VAS 5054a with computer by USB

odis-675-24

Open Computer->Manager->Device Manager->Softing Vehicle Interface->VAS5054

Open EDIC Configuration Manager

odis-675-25
Current connection is USB connection
Open Offboard Diagnostic Information System Engineering software on desktop
click on Diagnosis

odis-675-26

odis-675-27

odis-675-28

Coding function

odis-675-30

odis-675-31

special functions, i.e ECU programming, application programming etc

odis-675-32

odis-675-33

Step 5:  Pair Bluetooth

Installing device driver software

odis-675-35
device is ready

odis-675-35
select Bluetooth icon,add a device VAS5054

odis-675-36
ener the device pairing code: 082145725
click on Next
this driver has been successfully added to this computer
Open EDIC Configuration Manager-> Add a new device

odis-675-37
select COM Port 4

odis-675-38
Bluetooth connection and com port setup success.

Run ODIS-E 6.7.5 software and diagnose vehicle.

http://blog.obdii365.com/2017/10/06/install-vas-5054a-odis-engineering-6-7-5/

www.obdii365.com

Download and Install VAS 5054A ODSI 4.1.3 on Win7 Win8

This is how-to’s of step-by-step installation guide of VAS 5054A ODIS 4.1.3 on Windows 7/8/10.

 

Odis 4.1.3 software crack download:

http://www.obdii365.com/wholesale/odis-4-13-software-for-vas-5054a.html

There are some Odis 4.1.3 free download links available online, but most not tested yet;

This is odis service tested by professionals working for http://www.obdii365.com/ ;

It’s crack, 100% safe to use with VAS 5054A china clones with item no. sp33-c  sp33-b0   sp33-b  sp33-e

 

 

If you want a free odis-s 4.1.3, you can download from http://blog.obdii365.com/2017/05/22/vas-5054a-odis-4-1-3-free-download/

No one but yourself can take responsibility

 

Operation systems can be tried on:

Windows 7…Confirmed!

Windows 8…Need luck!

Windows 10…Need luck!

 

How to install VAS 5054A ODIS Service 4.1.3 on Windows 7:

 

Open local disk G:

Run Windows6.1-KB2921916-X86 Microsoft update standalone package

Download and install updates…

Installation completes! Close

Run Windows6.1-KB3033929-X86 Microsoft update standalone package

Confirm to install security update for windows

Download and install updates…

Installation completes!

Restart your computer

vas5054a-odis-4.1.3-windows-7-1

Open local disk G:

Open OffboardDiagSetup-Service_VWMCD_4_1_3-B41_1_3_1_2 application

Odis service installation begins. Next

vas5054a-odis-4.1.3-windows-7-2

Next

….

Next

Search the license: G:/odis 4.1.3 license/VW imported/license.dat, then Next

Next

Installing ODIS-Service….

Finish odis-s 4.1.3 installation

vas5054a-odis-4.1.3-windows-7-3

NO restart now

 

Open G:/odis 4.1.3 license/VW imported

Copy offboarddiaglauncher application

 

Open Offboard Diagnostic Information System properties on Desktop

Open file location: paste it on C:/Program files/Offboard Diagnostic Information System Service

Copy and replace!

Then close the interface

 

Run ODIS on Desktop as administrator

Send the hardware id to the dealer for odis activation

Then get registration information name & key, then enter to register

vas5054a-odis-4.1.3-windows-7-4

Select directory: G/update

Enter user name & keyword (it’s postsetup configuration data)

Select a language to install

vas5054a-odis-4.1.3-windows-7-5

vas5054a-odis-4.1.3-windows-7-6

Continue

Automatically open odis

Cancel download releasenotes

OK to continue

Read Warning/notes, then OK

End ODIS

 

Automatically installing VAS5045 device driver software

 

Again, Run ODIS v4.13 on Desktop

Cancel download releasenotes

OK to continue

Read Warning/notes, then OK

Starting diagnosis

vas5054a-odis-413-6

Ignition switched on, continue

Here, the professionals test odis 4.1.3 on Passat 3C 2007

vas5054a-odis-413-7

No RO

Continue

vas5054a-odis-413-8

vas5054a-odis-4

vas5054a-odis-4.1

vas5054a-odis-413-10

Done!

 

Have fun with VAS5054A tuning.

http://www.obdii365.com/producttags/vas-5054a.html

http://blog.obdii365.com/2017/06/20/vas5054a-odis-4-1-3-download-install/

Audi A6 2013 ECU Online Coding by VAS 5054A ODIS

This is the guide on how to do Audi online coding service using ODIS software together with VAG diagnostic tool. It’s coding example of Audi A6 2013.
Purpose:
Audi Online Coding
Model:
Audi A6 2013
All needed:
-working odis software (3.0.3/4.0.0)
-a HQ 5054a device:
Vas 5054a clone….confirmed!
Vxdiag vcx nano 5054a….confirmed!
Network status:
Connected; Online
Open VX Manager
vxdiag-manager
It’s connected to the Internet: Online
Open ODIS Audi
Warning/notes: OK
odis-audi
Start diagnosis
odis-diagnosis
Pick up vehicle: Audi A6 2013
audi-a6-2013
Select Engine electronic control system to identify control unit
engine-control-unit
Then, select Boot function
boot-function
Select ECU coding and Confirm to continue
ecu-coding
Then follow ODIS instruction; do and click on Complete/Continue
follow-odis
Connector the vas 5054 connector to the vehicle
Switch on ignition
turn-ignition-to-on
The ECU self-test did not find any fault code
Yes to do ECU online coding
ecu-online-coding
Yes to start the comparison of Predetermined value/ Actual value
Actual-value
The test completes
test-completes
Prepare to comparison of Predetermined value/ Actual value
Please connect a charger to the car
charger-to-car
For users with wireless scan tool (VAS5054A or Vxdiag vcx nano 5054), please connect it via the USB cable to avoid any change of Bluetooth connection
connect-vas-5054a
Start comparison of Predetermined value/ Actual value
When reading data, connect the  diagnostic tool to the corresponding hardware with working Network
working-network
Make sure an appropriate charger is connected
charger-connected
Have read data
read-data
Connect the diagnostic tool to the corresponding hardware with working Network
Establish network connection, then go on. Enter user id
enter-user-id
enter-user-id-2
Diagnostic report sent
diagnostic-report
Success!
success
Coding completed.
coding-complete

VAG ODIS Engineering ODIS-E 6.7.5 Test Working

ODIS-E 6.7.5 possible to work? Here are some vag ODIS Engineering software v6.7.5 to download for free and test with vas 5054a or vxdiag vcx nano 5054. Obdii365 engineers now are testing files below, and will report the result here.

odis-engineering-6.7.5

(Testing) ODIS-E 6.7.5 full packed

https://mega.nz/#!KgUSwQoL!ViPvSvL0tQa8nXWu9AycUJK_-_M_RwFz5J_SnprYdzc Password: Kurwa

 

(Testing) Launcher for ODIS Engineering 6.7.5

https://mega.nz/#!ks5ThSaT!BOeAxGKJ06_4hs6T-2B8XngTW77TZgwqWj-ri59TRhY

 

(Failed) ODIS-E 6.7.5 – PostSetup ISO

https://mega.nz/#!P4xlWKJa!f2YmG2AU1Zy4dyWYhmBIXLX4qbLq3hM-BgaLBC_A114

The potsetup is correct but does not have the files with xml extension, or which is the way to extrude them

* Obdii365 engineers verified it’s not working

 

(Testing) Postsetup_eng_6.7.5.txt

https://mega.nz/#F!n8lFEDga!_Vtu2qXOUpvb0bFhIqGleQ Postsetup 6.7.5 from china server with correct folder locations/names on mega server.

(Testing) ODIS-E 6.7.5 KeyGen         https://mega.nz/#!b1BRxaBY (1.8 MB)!RvoPjbvbBTc4dvomSp7DyMUpw1iEpWbcBnRlNAkgQcMNo password needed Here is the KEY Gen software so you can just generate your own KEY
FYI The HW-ID is brought up when you load ODIS-E the first time and any time the hardware is changed.

(Tested OK) ODIS-E 3.0.3

http://www.obdii365.com/wholesale/best-quality-vas-5054a-vw-audi-bentley-and-lamborghini-multi-language-with-oki-chip.html

It’s kind of old, but the crack has been tested without any issues. Definitely safe to use it with VAS 5054A, VXDIAG VCX NANO 5054 diagnostic tool. Works good in basic diagnosis, key programming, ecu programming, and offline flash also.

(BIG THANKS to all contributor!)

VAS 5054A ODIS 3.0.3 VCI not defined solution

Here is the solution to VAS 5054A Bluetooth interface serial number and ID VCI not defined error.

Problem:

When i tried to connect VAS5054A ODIS 3.0.3 scanner with computer, it failed to connect, it shown me Serial Number and ID VCI defined.

vas-5054a-odis-error-1

vas-5054a-odis-error-2

Error cause:

You select both USB and Bluetooth connection. Because you have connected Bluetooth via COM4, and activated the USB connection as the same time.

So ODIS will not define you VCI interface.

If you have connect the vas 5054a via Bluetooth, then do not connect USB, vice versa.

vas-5054a-odis-error-3

The diagnostic base system can access the VAS5054A via Bluetooth or USB.

Access via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.
Access via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.