Tag Archives: VAG key programmer

Top 5 VAG 4th 5th IMMO Key Programming Tools Recommendation

Top 5 VAG 4th 5th IMMO key programming tools Wanted, all here:

  1. Xhorse VVDI2 +4th 5th Immo authorization service (Item NO. SV86-5) and Xhorse VVDI2+ 5th IMMO authorization service (Item NO.SV86-2)
  2. VVDI+ 4th IMMO coil (Item No. SO94) and VVDI + 5th IMMO coil (Item NO. PP030)
  3. XTOOL KC100 VW 4th & 5th IMMO Adapter for X-100 PAD2
  4. OBDSTAR RFID Code Reader Adapter
  5. JMD Handy Baby support only 4th IMMO programming

To sum up, in the Chinese locksmith market, there are 4 Companies who have solution to program VW Audi Skoda Seat 4th 5th IMMO, incl. Xhorse, XTOOL, OBDStar and JMD.

 

 

  1. (BEST) Xhorse VVDI2 VAG key programmer (Item NO. SV86)

Both VAG 4th 5th Immo OK  

vvdi2-key-programmer

xhorse-vvdi-2-vvdi-ii-key-programmer-5th-authorization

  • vvdi2 vw 4th immo authorization:

– VAG with 4th immobilizer system

VW/Audi/Skoda/Seat/Porsche/Bentley vehicles all have 4th immobilizer car.

 

For Immo status, go to “Key Learn ->Key Learn”

 

–Passat /CC with 4th immobilizer system

Passat/CC has 2 transponder types: one is MEGAMOS 48, another one is HITAG2 (46 Transponder). Before make key you must select transponder type 48 or 46. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method.

 

–Touareg/Phaeton/A8/Cayenne/Bentley with 4th immobilizer system

 

This type use HITAG2 (46 Transponder).

 

–Audi A6/Q7/Allroad with 4th immobilizer system

 

This type use MEGAMOS 8E transponder. This type support OBD lost all key, Detail can be found in Key Learn->Key Learn->OBD Lost All Key method

 

2) 5th immobilizer system immo authorization:

This type use VAG immo5 transponder or OEM key support following cars: A4 (2009-), A5, Q5, A6 (2012-), A7, A8(2011-), Touareg (2011-) to make a dealer or learn keys.

Xhorse VVDI2 VAG support the 4th and 5th immobilizer systems

Xhorse VVDI2 +4th 5th Immo authorization service (Item NO. SV86-5)

Xhorse VVDI2+ 5th IMMO authorization service (Item NO.SV86-2)

 

  1. Old VVDI VAG interface: VW 4th/5th immobilizer programming OK

 vvdi

To program 4th 5th IMMO, VVDI need extra Coil.

VVDI 4th IMMO authorization service, pay extra $95for the coil:

vvdi-4th-immo-update-tool

VVDI 5th IMMO authorization plus VVDI:

 vvdi-plus-5th-immo-update-tool

Top 3: XTOOL X100 PAD2 + KC100 Program VAG 4TH 5TH IMMO

XTOOL X100 PAD2 full package with KC100 adapter is verified to program key for VAG 4th& 5th IMMO.

Matched Dashboard Type for 4th ,5th immobilizer of VW/Audi/Seat/Skoda:

CDC24C32,NEC24C32,9S12,NEC24C64,NEC24C64 color screen, Jiangsen, NEC95320, NEC24C64 white screen.

xtool-pad-2-4th-5th-immo

How to use KC100 adapter?

4th 5th immo-01

4th 5th immo-02

4th 5th immo-03

4th 5th immo-04

4th 5th immo-05

4th 5th immo-06

4th 5th immo-07

Top 4: OBDSTAR X300 DP/X300 Pro/X100 Pro+ RFID Adapter
OBDSTAR RFID IMMO adapter for VW AUDI SKODA SEAT 4 & 5 GEN,it is working with OBDSTAR Key Master DP/ X300 DP/ DP PAD/ Key Master/ X300 Pro3/ X100 Pro.

obdstar RFID reader suitable tools-01

Top 5: Handy Baby key programmer + JMD Assistant Handy baby OBD Adapter = 4th IMMO programming.

JMD Assistant -02

To program VAG 4th IMMO, you need an extra JMD Assistant Handy baby OBD Adapter, JMD Assistant is an OBD model to help Handy Baby to read out data from Volkswagen cars, and it needs your Handy Baby upgrade to at least version 8.0.0.
JMD Assistant reads data from Volkswagen cars only and won ‘t write any data to cars, even in all key lost , so it won ‘t be locked when the car connect to the server in 4S. Handy Baby reads data from JMD Assistant with RF, and it no needs any cables or computer during your work.

 

http://blog.obdii365.com/2017/05/26/to-program-vag-4th-5th-immo-key-xhorse-xtool-or-obdstar/#4

How to program VAG keys by VAG KM+IMMO Tool

This is a instruction on how to program VAG group VW Audi Skoda Seat keys using Xhorse VAG KM+IMMO Tool OBD2 cable when all keys are lost.

vag-km-immo-tool-by-obd2-new-2

Here is the procedure of new keys programming by VAG KM+IMMO OBDII Tool:

1) Connect “VAG KM+IMMO Tool” to both pc and car.

2) Click “Service Mode” button to open “Service Mode” dialog.

xhorse-vag-km-immo-tool-all-key-lost

3) Remove the 24C32 chip from instrument, read 24C32 EEPROM data with programmer, and save EEPROM.

4) Switch to “Service Mode” dialog, load EEPROM.

5) Save special EEPROM, write data to 24C32 EEPROM back to the chip,

and install chip back in instrument.

6) Save KEY file.

7) Login with the key file.

8) Click “Write” button to write back the original EEPROM (via OBDII).

9) Close “Service Mode” dialog, start adding dealer key (Click “Dealer Key” button, open “Dealer key” dialog.)

Note: Before the process is complete, keep the PC and device connected with vehicle, do NOT disconnect. If you interrupt, you

need to re-start from the first step.

 

 

 

VAG KM+IMMO Tool VAG key programmer & mileage programmer car list:

 

CDC32xx Module Options:

 

Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Passat B6  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

EEPROM read/write;

Bora, Jetta  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Touran  from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Caddy   from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write;

Tiguan, Eos  from year 2008+: odometer correction, PIN code read, EEPROM read/write;

Octavia  (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):

odometer correction, PIN code read, EEPROM read/write

 

NEC 24C32 Module Options:

 

VW Golf 6 – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW Passat , Passat CC – 2009+ with NEC and 24C32 EEPROM – odometer programming  by OBDII;

VW Tiguan – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW T5 – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW Polo  – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda Octavia 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda SuperB – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda Roomster, Yeti – 2009+ with NEC and 24C32  EEPROM – odometer programming and immobiliser data read  by OBDII;

Seat Ibiza – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW Multivan  – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW EOS  – 2009+ with NEC and 24C32 EEPROM – odometer programming  by OBDII;

VW Caddy – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW Scirocco – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW Bora   – 2010+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

VW Jetta  – 2010+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda Fabia 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda Altea – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda Yeti – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda Altea – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

Skoda Exeo – 2009+ with NEC and 24C32 EEPROM – odometer programming and immobiliser data read  by OBDII;

 

GOLF6 MM7  Module Options:

 

VW Golf 6 – 2010 with MM7 (9S12) EEPROM – odometer programming and immobiliser data read  by OBDII;

VW Tiguan – 2010+ with MM7 (9S12) EEPROM – odometer programming and immobiliser data read  by OBDII;

http://key-programmer.org/2016/11/03/vag-cars-all-key-lost-by-vag-km-immo-tool/