Original Tango Key Programmer new software 1.110.1 released at the end of Nov, 2017.
[+] SLK-05 Transponder launched! Supports Toyota’s Smart Key AES
This feature allows to start an engine, to
Learn new keys.
[+] TangoPlus for Toyota V6.5
True Emulation via OBD of all Smart Keys Page1 39*
The only right conception to solve the “All Keys Lost”problem.
[+] Image generator Toyota Page139 on SLK-05.
Transpinder is fully compatible to Toyota requirements that A
Customer is able to learn it vla OBD.*
[+] Cloning Toyota Smart Key 128BIT(Page1 39) to SLK-05*
[+] Key maker BCM2 Audi A4/A5/Q5(95320,PCF7945AC)*
[+] Key maker BCM2 Audi A4/A5/Q5(NEC,PCF7945AC)*
[+] Key maker Ford Transit 2017-(NEC,DST80)*
[.] Improved Toyota Certification ECU maker: compatibility for keys
[.] Improved operations with PCF7930,31,35. Now it is possible to make Individual settings to each type of transponders.
Emulator SLK-05 – Supports work with DSTAES smart keys [Page1 39 ]. SLK-05 supports emulation/cloning/image generation – functionality of the emulator requires activation of SLK-05 additional software. Added in Tango update 1.110 (November 2017)
Here’s Toyota Lexus SMART KEY All Keys Lost programming guide with Tango emulators.
Toyota Camry 2013 Smart key 128 bit all keys lost:
Connect Toyota techstream OBD cable with car via vehicle’s diagnostic connector
Open Tango key programmer software on desktop
Click on TangoPlus->Toyota
Click on Settings
Check Pass thru Devices has been selected as MVCI
Click on Connect to car
Click on Read data from car
Click on Save file to save data
Keys 88 has been detected
Use SLK-03 transponder
Insret Scorpio-LK SLK-03 emulator into Tango
click on Write Emulator on tango software
Tick SLK-03 and press OK
The dashboard indicators flash
Tango Emulator programmed successfully.
Here is the tutorial on cloning DST Transponder by using original Tango key programmer.
Note: The document is only for education purpose. You can check the instruction on original website scorpio-lk as well.
Currently only Toyota and Yamaha keys are supported.For more details, Toyota supported keys have the 1-st page from the following set:
X4*-only european market supported.
Cloning DST Transponder by Tango:
Run the Clone Mode selecting the appropriate menu item:
The next screen will appear:
Place an original key on the Tango and click “Read original key” button
Click the “Decode Transponder” button. Tango software will prompt to to decode transponder:
Tango transponder programmer will run the decoding process:
In case the decoding finishes successfully the “Write Clone” button will appears:
Now,remove the original key and replace it with EH2 (battery emulator) or TPX2 transponder. You are all set to make a clone. Click “Write Clone” button and Tango will do it.