Tag Archives: SKP1000 key programmer

How to Program 2013 Hyundai IX35 Smart Key by SKP1000

Guide to program smart key on a Hyundai IX35 year 2013 by using SKP1000 car key programmer via OBD.
Key information:
Original key: 3-button remote key
Frequency: 433MHz
Chip: ID46 chip
Start engine: One-button start/stop
Card slot: No
Pin code: get 6-digit pin code from VIN
Device: SKP1000 tablet auto key programmer
skp1000-hyundai-ix35-1
Procedure:
Connect SKP1000 key programmer with vehicle via OBD socket
Come to immobilizer function, select Hyundai
skp1000-hyundai-ix35-2
Select Smart key-> By Vehicle-> IX35 smart key (without slot)-> System (without slot)
skp1000-hyundai-ix35-3
skp1000-hyundai-ix35-4
skp1000-hyundai-ix35-5
skp1000-hyundai-ix35-6
Choose OBD connector
Turn ignition off
Press YES
skp1000-hyundai-ix35-7
Open and close car door before communication
Press YES
Select Smart key programming
skp1000-hyundai-ix35-8
SKP1000 will require to enter pin code, enter 6-digit code and confirm
skp1000-hyundai-ix35-9
Press the Start button with smart key vertically within 5 seconds
Press YES to continue
skp1000-hyundai-ix35-10
Register key success.  Whether to register next key?
Press YES
Press the Start button with smart key vertically within 5s
Register key success.  Whether to register next key?
Press NO
skp1000-hyundai-ix35-11
Program success.

SKP1000 Program Freelander2 2013 All Keys Lost by OBD

How to use SKP1000 key programmer to program smart key on a Land Rover Freelander 2 year 2013 when all keys lost? Check Guide below:

skp1000-freelander2-2013-1

Information:

Original key: 5-button 433MHz smart key

Start engine: One button Start-Stop

Device to program: SKP1000 tablet car key programmer

skp1000-freelander2-2013-2

Procedure:

Connect SKP1000 with vehicle via OBD diagnostic socket

skp1000-freelander2-2013-3

Go to Immobilizer function-> Land Rover

skp1000-freelander2-2013-4

Select Freelander 2 2013+ (L359)

skp1000-freelander2-2013-5

Select Smart key system

Choose OBDII connector

Turn ignition OFF

Press YES to continue

skp1000-freelander2-2013-6

SKP1000 car key programmer auto detect vehicle VIN, parts number, firmware version etc information

skp1000-freelander2-2013-7

Select All Key Lost

skp1000-freelander2-2013-8

SKP 1000 requires at least 2 keys to be programmed to start vehicle

Press YES

Configuring system, please wait

skp1000-freelander2-2013-9

SKP-1000 detect key number already programmed: 2

skp1000-freelander2-2013-10

Follow key programmer prompt to hold the smart key in hand, Press YES to go on

skp1000-freelander2-2013-11

Press on the remote Lock button once within 5 seconds to add smart key. You will hear 4 DI DI DI DI beep sound.

Repeat the procedure for 3 times.

skp1000-freelander2-2013-12

SKP 1000 identify key position if program 1st key success.

skp1000-freelander2-2013-13

Continue to program next key?

Press YES

Repeat steps above

Hold the smart key in hand, Press YES to continue

Press on the remote Lock button once within 5 seconds to add smart key. You will hear 4 DI DI DI DI beep sound.

Repeat the procedure for 3 times.

Program seconds smart key success.

SKP1000 again ask if continue to program next key? Press YES to go on and NO to go back.

skp1000-freelander2-2013-14

Program success.

http://www.skp1000.org/

Unlock and Program Toyota Land Cruiser VXR V8 Smart key

Guide to unlock and program smart key on a 2016 Toyota Land Cruiser VXR V8 5.7 4×4.

toyota-vxr-v8

The solution was provided by a Chinese locksmith A Jie.

 

Problem:

A customer bought a Toyota Cruiser VXR V8 5.7 in Aug, 2016. When came back home he found one of keys did not working, could not start the vehicle. He came me for help.

 

Diagnose:

Check the key frequency and chip type with ND900 key copy machine. It showed key’s programmed, so the smart key is okay.

unlock-vxr-v8-smart-key-1

unlock-vxr-v8-smart-key-2

Analysis:

1. The smart key has been programmed but not been learned

2. 4S store gave you the wrong key (the key is not for this vehicle)

 

How to check:

Method 1:

Program/learn the smart key by using SKP1000 tablet car key programmer. Unfortunately, skp-1000 failed to learn key. So the smart key is not correct key for this vehicle.  You should get the smart key unlocked and programmed. Go and check method 2.

 

Method 2:

Step 1: Unlock Smart key

Unlock the smart key with Xhorse VVDI2 key programmer or ND900 Mini

unlock-vxr-v8-smart-key-3

unlock-vxr-v8-smart-key-4

Perform Blank Check,  key indicator will flash within 5 seconds if VVDI2 unlock success

unlock-vxr-v8-smart-key-5

Again use ND900 to check the unlocked smart key.

It shows not been programmed

unlock-vxr-v8-smart-key-6

Unlock smart key done.

 

Step 2: Add/Program smart key 

Connect SKP1000 key programmer with vehicle via OBD socket

Select Immobilizer function- >select Toyota->Smart key CANBUS-> Smart key system

unlock-vxr-v8-smart-key-7

unlock-vxr-v8-smart-key-8

unlock-vxr-v8-smart-key-9

Choose OBDII connector

Turn ignition ON

Press YES to continue

unlock-vxr-v8-smart-key-10

Press the Start button

unlock-vxr-v8-smart-key-11

Put the registered smart card into coil.

If hear a beep sound, take away the smart card

unlock-vxr-v8-smart-key-12

Select Add smart key

unlock-vxr-v8-smart-key-13

the working key is close to the emergency starting induction antenna

unlock-vxr-v8-smart-key-14

Change a new smart key and put it into the coil

Press YES to continue

unlock-vxr-v8-smart-key-15

the new smart key is close to the emergency starting induction antenna

unlock-vxr-v8-smart-key-16

Configuring…

unlock-vxr-v8-smart-key-17

Program/Add smart key success

unlock-vxr-v8-smart-key-18

Test the new smart key.

http://www.key-programmer.org/2017/08/24/unlock-toyota-land-cruiser-vxr-v8-smart-key/

SKP1000 Adds Remote key for Jeep Wrangler 2013

Here is the easy guide on programming Jeep Wrangler 2013 2-button straight remote key with ID46 chip by using SKP1000 key programmer via OBD.

skp1000-Wrangler-smart-key-1

skp1000-Wrangler-smart-key-2

Connect SKP1000 tablet car key programmer with vehicle via OBD diagnosis socket under the dashboard through the main cable

(The menu here is in Chinese, English language is available as well)

skp1000-Wrangler-smart-key-3

Select Immobilizer system (Straight remote), you have 3 three function options under the menu, Add key, Delete key and read pin code. Add a key requires pin code, delete key does not need.

Here select Add a key

skp1000-Wrangler-smart-key-4

SKP-1000 key programmer will read pin code via OBD automatically

skp1000-Wrangler-smart-key-5

Insert the key to be programmed

Turn ignition switch to ON position

skp1000-Wrangler-smart-key-6

Manually enter security code read previously

Follow skp 1000 prompt

Program success.

If need to program second key, select Add a key and repeat above procedure.

SKP1000 will generate remote control automatically after program completed.

 

Note: You can also use 3 buttons straight remote key to add a key on this model. But need delete lost key data fist.

www.skp1000.org

How to use SKP1000 Tablet Key Programmer

SKP1000 tablet auto key programmer User manual, function list, vehicle coverage and update guide.

  1. Product description

 skp1000

–Confirm –Up — Down — Back

— Confirm — Back — Help

— Up — Down

— Left — Right

— Smart remote controller frequency detection area –Help

SN: Serial Number

1.1 Supported protocol:

SAE-J1850 PWM, SAE-J1850 VPW, KWP2000, ISO-9141, CANBUS, SINGLE CAN

1.2 Package Includes:

1* Main unit

1* touch pen

1* main cable

1* Honda 3pin adapter

1* Kia 20pin adapter

1* Hyundai / Kia 10pin adapter

1* Haima 7pin adapter

1* power adapter

1* TF card

1* TF card reader

1* USB cable

1* CD with user manual

  1. Menu Instruction

2.10 Main menu basic functions

skp1000-menu

Car functions

Choose ” Car functions” to perform immobilizer, mileage adjustment, remote controller,

Oil/service Reset, throttle body adjustment, ETC,EPB, pin code calculation, personalized settings and special function

skp1000-3

2.11 SKP-1000 immobilizer function:

Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Read keys from immobilizer memory
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;

skp1000-vehicle-coverage-1

2.12 Mileage adjustment via OBD

skp1000-vehicle-coverage-2

2.13 New remote controller programming

skp1000-vehicle-coverage-3

2.14  Oil/Service reset

skp1000-vehicle-coverage-4

2.15 throttle body adjustment

skp1000-vehicle-coverage-5

2.16 EPB(Electric park brake)

skp1000-vehicle-coverage-6

2.17 Immo PINCODE reading

.Immo PINCODE reader for many vehicles and no need pincode when programming keys for many vehicles.

skp1000-vehicle-coverage-7

2.18 Personalized settings

skp1000-setting

2.19 Special functions

Plug into the adapter to perform special functions.

2.20 System settings

Choose “ System settings” to read the machine basic info.

2.21 SKP1000 Firmware upgrade

Choose ” Firmware upgrade” to update the machine firmware.

skp1000-firmware-update-1

skp1000-firmware-update-2

skp1000-firmware-update-3

skp1000-firmware-update-4

2.22 User program test

Choose “User program test” to reset the SKP1000 machine to collect corresponding data.

  1. How to use SKP1000 to program key on specific car model?

Step-by-step procedure:

For example, to operate Hyundai SONATA 8 smart remote controller, firstly connect the main cable to the machine, then plug the OBDII adapter to the car.

Power on the SKP1000 machine, until you see the LOGO, press [YES] to main menu, Choose “Immobilizer”, press “Confirm” to vehicle list.

Choose model: Hyundai, press “Confirm” to enter.

10

11

12

Choose “Smart card”, press “Yes” to enter.

Choose ” by car model”, press “Yes” to enter.

Choose “SONATA 8 (with card slot), press “Yes” to enter.

 

Choose “Smart card (with card slot), press “Yes” to enter.

Follow the tip to turn off ignition, press “Yes”

Follow the tip to open the door and close for one time, press “Yes”.

Choose smart card to match, press “Yes”

Follow the tip, insert the smart card into the slot, and you can hear alarm sound, turn off the ignition, press “Yes”.

Input the password

Check if the password is correct, press “Yes” to confirm.

The first smart card program successfully, and it will ask you if you program the next one, press “Yes” to confirm.

Insert the second smart card into the slot, you can hear the alarm sound, press “Yes”.

Program successfully, press “No” to back.

With two new smart card keys, you could start the car, if you need to add more keys, just repeat the above steps.

  1. Firmware update

Before update firmware, please take out the TF card and insert it into the card reader, then plug into the computer USB port. Double click “My Computer”, find out ” local Disk (H:), right click to choose “Format”.

Tip: Tick on the “Quick format” and click “Start.

After complete format, go to the official site to download the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.

Click on “Firmware update”.

Firstly choose “System firmware update”, press “Yes”, the procedure shown as below:

Update successfully shown as below.

Press “No” to back.

Choose ” Adapter firmware update”, after finish, reboot the machine to go on use SKP1000.

Done.

Any question, please contact your supplier.

http://www.skp1000.org/skp1000-tablet-key-programmer-user-manual/

SKP1000 Key programmer read Fiat Siena ECU ISO Code by OBD

Older Fiat Siena or Palio required to remove ECU or write key to start to make new key. Here is revolutionary solution on getting Fiat ECU ISO code and programming special ID48 chip key by using SKP1000 key programmer via OBD directly. SKP1000 tablet=SKP900+ Lonsdor CI600 Plus. fiat-siena
Instruction:

Step 1: Read ECU ISO code (security pin code)

Select car brand: Fiat

select-read-iso-code
Select read iso code
select-immo-system
Select Electronic immobilizer system
read-iso-code
Select read iso code
disconnect-battery
After read ecu iso code success, disconnect the battery.
If read iso code failed,please disconnect the battery and try again
(Anyway, disconnect the battery)
read-car-info
SKP-1000 read Fiat info and fiat iso code
Press YES to continue
working-key
Check if you have a working key
If yes, Press YES button to continue
turn-ignition-on
Turn ignition to ON position
turn-ignition-off
Turn ignition to OFF position
turn-ignition-on
Turn Ignition ON
read-iso-code-success
Read iso code success
enter-iso-code
manually enter 5-digit iso code
skp1000-read-immo-data
SKP1000 will read the immo data, please write download the numbers (will be used to generate chip)

Step 2. Generate Fiat special ID48 chip

generate-special-chip

Select Fiat common chip to generate special chip

generate-fiat-id48-special-dealer-key
select generate Fiat ID48 special dealer key
immo-adpater
Insert the immo adapter into the SKP1000 car key programmer, select Special function and select Generate Fiat chip
insert-id48-chip
Insert the blank ID48 chip into the coil of the adapter
enter-immo-code
Manually enter 24-digit immo code (read previously)
immo-code-marked-red
Enter 24-digit code marked red
confirm-immo-code
confirm the entered digits

Step 3: Program chip key

select-program-key

select Program key

select-siena-key-programming
Select Siena key programming,
SKP1000 will also program key for Fiat 500, Boyue,Palio,Leap,viaggio and Perla
select-immo-system
Select Electronic immobilizer system
select-obdii-connector
Select OBDII connector
turn ignition to ON position
select-program-keys
select Program key
Key without programming cannot be used
Press YES to continue
enter-iso-code
enter 5 digits iso code
confirm
program-more-key
continue to program more keys
Press YES to continue
change-next-key
please change next key
program-success
If the dashboard indicator goes off, program success.
Disconnect SKP 1000 and test the new key.