Tag Archives: MB SD connect c4

Download and Install 07.2018 Xentry OpenShell

Mb Star diagnostic 07.2018 Xentry OpenShell XDOS download with security:
2018-07-xentry-openshell-1
2018-07-xentry-openshell-2
2018-07-xentry-openshell-3
2018-07-xentry-openshell-4
100% tested and confirmed
07.2018 XDOS Windows 7 Windows 10 Install:
– 07.2018 Xentry/DAS Windows 7 FAQs:
  1. Try install win7 x86?
Install it on win 7 64 Bit or remove the package.
  1. I can try install win7 x86 but not complete. I have error 393. part gives error. How to solution.
try install at fresh windows SP1 also disable UAC..
  1. Have Communication Error 1.53315.9999 on win7 x86 pro. How to solve
everything fine with me, but make sure of the IP, try to do the MUX firmware again and report
– 07.2018 Xentry/DAS Windows 10 FAQs:
  1. Xentry 07.2018 on windows 10?
today i installed at windows 10 64bit. windows download form microsoft site. before installation i stop windows auto update and disable UAC. firewall. defender. everything work good…
  1. I counted a problem after installing 7/2018 on my Windows 10 64bit:
    “Communication Error 1.53315.9999 – Initialization of the multiplexer has failed”
    The XDOS doesn’t see Ignition-On signal.
Ps. Before I used 03/2018 without any problem.
2018-07-xentry-openshell-communication-error
how did you install 7.18 ? did you uninstall 3.18 and install 7.18?
most probably your problem is windows issue, specially windows 10
I suggest you try your mux on other system first and report
– 07.2018 Xentry/DAS errors and solutions:
  1. Xentry.exe application error?
2018-07-xentry-openshell-application-error
restart and try again, check your memory as well
stop windows defender and UAC
make sure you don’t have viruses
stop antivirus
check if there is any software consuming the memory
check disk usage if it is always 100% in you windows 10 then google its solution which is available online
and if you can do diagnostic for your RAM do that from your laptop
  1. Anyone the missing akktab.csv pkw file for 2018.07 ?
03.2018 akttab for 07.2018 offline coding:
  1. After updating the MB SD Connect C4 MUX firmware I got the cal error 870.
    It seems that the new version has blocked my MUX, even I have applied the blacklisted fix before!!!
Use correct lic.sli and Problem is gone.
  1. Installed this version but when doing a forced regeneration when asked to start engine I am loosing connection with multiplexer?
update full addons and try again
  1. I need Hht diagnostic. Hht only working x86. I can try xentry sim test 212 and 204 not complete. Not working xentry sim. How to solution error. Please help me.
2018-07-xentry-openshell-error
Just finished x32 installation for HHTwin and no problem.
Categories
Hardware
Software
Forms
Keywords
Software Support
Change log
Release Notes 07/2018
  1. New features of XENTRY Diagnosis Kit 3 systems
New features in Support Tool:
The Support Tool has been given a new icon in a new design.
The “Contact Support” tab contains the email address for the User Help Desk.
The “Support Packages” tab has a “Pin icon” located at the left next to each screenshot. When you
click on the button, the Screenshot Tool marking window appears.
Screenshot Tool: After closing the marking screen, the selection screen for the Screenshot Tool
appears. This makes it easier to create several screenshots than was previously the case.
A graphic set of instructions before the test is available in “VCI self-diagnosis”.
“Network self-diagnosis” shows adapter settings and network settings and a connection check is also
run.
“XENTRY Diagnosis Pad” tab: System information displays the connection status to the backend
servers in the form of an immediate status picture.
The “Client test” button in the “Information” is no longer shown, it is now available as bandwidth selfdiagnosis.
The new overview page in the “XENTRY Diagnosis Pad” shows a summarized view of all the relevant system information.
New features in XENTRY Update Service:
If Retail Data Storage malfunctions because of a defect, ConfigAssist can be used to configure the
“RDS failure” fall-back mode. In this mode the data are loaded directly by the XENTRY Diagnosis Pad
from the Internet. Important note: Please coordinate this in advance with your IT manager!
Connected XENTRY Kit I Kit 2 systems are now visible in the XENTRY Update Service Control
Center in Device Administration
The flashware user interface does not contain any details on Regio or the type of Digital Operator’s
Manual, the HLI information is no longer available
New feature of XENTRY Diagnosis VCI:
The WLAN channel for XENTRY Diagnosis VCI can be configured.
Important: This setting is only to be used when the VCI connection has problems!
  1. Data storage media
1 Blu-ray Disc for XENTRY Diagnosis Software for XENTRY Diagnosis Kit 3
1 Blu-ray disc for XENTRY Kit I Kit 2 Update
Telematics and Regio-DVDs, if applicable
Passenger cars:
The following telematics CDs/DVDs are still required (item numbers, market-dependent, plus any special provisions):
1668270859-0001 1718270100-0001 2168274159-0001
1668271300-0001 1718274459-0001 2218270065-0001
1668273900-0001 1978270400-0001 2218270100-0001
1668274600-0001 2048271000-0001 2218270465-0001
1668274700-0001 2128271900-0001 2218270665-0001
Vans:
The following telematics CDs are still required (item numbers):
1668273500-0001
6398271159-0001
6398271259-0001
Changes since the last release
New documents
No entries available
Updated documents
Installing and configuring XDOS with VCI
User manual XENTRY Diagnostics Open Shell Variants
Help Card XENTRY Diagnosis VCI

Free download MB Star 2016.7 EPC WIS PL70

Free download 07.2016 Mercedes-Benz EPC, WIS/ASRA net, Price List PL70 to perform diagnosis or programming using MB SD Connect C5 or MB SD C4.

Mercedes-Benz EPC net, electronic spare parts catalogue consists original spare parts catalogue, all models cars, trucks, buses Mercedes-Benz of all markets, Smart & Maybach also including. Mercedes EPC net represents the latest development in EPC Flexible Publishing.

WIS net aim is to improve the electronic availability and usefulness of the workshop documentation (e.g. repair, maintenance, basic data, wiring diagrams and in part also documentation organization) of Mercedes-Benz and smart products by optimizing access and presentation.Laptop requirements:
– O.S.: Windows 7, Windows 8, Windows 8.1, Windows 10
– CPU: Pentium/Athlon 2 GHz or higher
– RAM: 1 GB of system memory
– Hard Drive: 100 GB of available space
– DVD-DLEPC, WIS, PL70 source:

http://www.obdii365.com/wholesale/mb-sd-connect-compact-4-star-diagnosis.html

(it’s quality-guaranteed, tested by mbstartool engineers- without issues)

sd-connect-c4-c5-wis-epc-pl70-2016.7

Also, you can get software for free, shared by forum fellows.

Free Mercedes EPC net [07.2016] – unknown security

http://nitroflare.com/view/1C0389A5EE5ACCE/E_P_C_07.2016_Update.part1.rar

http://nitroflare.com/view/07A244425EFC55B/E_P_C_07.2016_Update.part2.rar

http://nitroflare.com/view/9E3563718F651DA/E_P_C_07.2016_Update.part3.rar

http://nitroflare.com/view/08F6A6F810A2CEB/E_P_C_07.2016_Update.part4.rar

http://nitroflare.com/view/3C5A082C9734070/E_P_C_07.2016_Update.part5.rar

http://nitroflare.com/view/6507B5FC7B07F5E/E_P_C_07.2016_Update.part6.rar

http://nitroflare.com/view/28B84127CD805E0/E_P_C_07.2016_Update.part7.rar

Free Benz WIS net [07.2016] Full – unknown security

http://nitroflare.com/view/D4702E14C2A86E7/W_I_S_07.2016_Full.part01.rar

http://nitroflare.com/view/A53F612BE5DB569/W_I_S_07.2016_Full.part02.rar

http://nitroflare.com/view/F656A5449434526/W_I_S_07.2016_Full.part03.rar

http://nitroflare.com/view/DA6F057259AD2D7/W_I_S_07.2016_Full.part04.rar

http://nitroflare.com/view/154E207D879954D/W_I_S_07.2016_Full.part05.rar

http://nitroflare.com/view/624126553D42297/W_I_S_07.2016_Full.part06.rar

http://nitroflare.com/view/F850EEDD825D251/W_I_S_07.2016_Full.part07.rar

http://nitroflare.com/view/65E543A56BC2082/W_I_S_07.2016_Full.part08.rar

http://nitroflare.com/view/13103ED4B42B1C2/W_I_S_07.2016_Full.part09.rar

http://nitroflare.com/view/8436880C5A6E07E/W_I_S_07.2016_Full.part10.rar

http://nitroflare.com/view/EAEC86696FA2B48/W_I_S_07.2016_Full.part11.rar

http://nitroflare.com/view/55A3E857E445B22/W_I_S_07.2016_Full.part12.rar

http://nitroflare.com/view/F84083767D813A5/W_I_S_07.2016_Full.part13.rar

Mercedes-Benz Price List (PL-70/1) [06.2016]

http://nitroflare.com/view/BB976DE476D0CA6/P_L_06.2016.rar

NOTE:

 

TRY free EPC, WIS, PL70 ON YOUR OWN RISK!

2016.7V MB SD C4 DAS Win7 Win8 HDD SSD

Mbstartool.com is currently rolling out latest Mercedes-Benz MB Star diagnostic DAS Xentry software 2016.07V for MB SD Connect C4 and MB Star C3 diagnostic system.

 

Software version: 2016.07V

Software optional:

500GB 2016.7V DELL D630/C4 External Format HDD Supports Win7/win8

256GB V2016.7 MB SD Connect C4/MB Star C3 SSD DELL D630 Format

256gb-ssd-v20167-mb-sd-c4-mb-star-c3-software-8

Software Language: Chinese, English, Croatian ; Czech; Danish; Dutch; Finish;French; German; Greek; Hungarian;Italian; Japanese; Korean; Polish; Portuguese; Romanian;Russian; Spanish; Swedish;  & Turkish.

You can log in Daimler AG program without user name and password needed, it is used to check price for Benz vehicle accessories.

WIN7 HDD do not support HHT-WIN! Software version newer than V2015.12 do not support HHT-WIN!

 

2016.7V MB Star diagnosis software including:

1.D-A-S / Xentry 2016.7 : the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IB M high-quality computer can realize the quick and accurate code reading and the whole car system testing
2.W-I-S net 2016.06: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3.EPC.net 2016.06: Electronic Parts Catalog
4.ST Finder 2016:Part location finder
5. STARUTILITIES: the movement management system and self-test
6. SDMEDIA 2014
7. PL70
MB SD Connect C4 2016.7V Software Display:
2016.07v-SD-C4-DAS-Xentry-1
2016.07v-SD-C4-DAS-Xentry-3
2016.07v-SD-C4-DAS-Xentry-2
2016.07v-SD-C4-DAS-Xentry-3
2016.07v-SD-C4-DAS-Xentry-5
Star Finder 2016
2016.07v-SD-C4-DAS-Xentry-6
EPC 2016.06
2016.07v-SD-C4-DAS-Xentry-7
V2016.7 MB SD C4 Software Functions:
1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram
Testable system:
ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
Bz ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

Xentry DAS, what Mercedes models can & cannot do?

In the Mercedes software Xentry / DAS, there are lots of Mercedes-Benz Group models including Mercedes-Benz, Smarts, and MAYBACH,SETRA, COBUS, MITISUBISHUI FUSO. But what models can MB Star diagnostic tools do and cannot do? Read the vehicle list here to get it.

 

What models Xentry / DAS can do?

MB SD Connect C4 can works well on Mercedes-Benz passenger cars, trucks, vans, buses, unimog, super sports cars, and Smart also.

Passenger Cars:

A(176), A(169), A(168), B(246), B(245), CLC(117), C(204) C(203), C(202), 190(201), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), S(126), E(207), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140), SLK(172), SLK(171), SLK(170), SL(231), SL(230), SL(129), SL(107), SLS(197), M(166), M(164), M(163), G(463), G(461), E(212), E(211), E(210), 124(124), S(222), S(221), S(220), S(140), CLK(209), CLK(208), CLS(218), CLS(219), CL(216), CL(215), CL(140), SLK(172), SL(231), SL(230), SL(129), SL(107), SLS(197), M(166), M(164), M(163), G(460), GL(164), GLK(204), R(251)

xentry-das-passenger-cars

Vans:

MB 100(631), T1, SprinterIII, SprinterII, SprinterI, Sprinter900, Citan, Vito(639), Vito(638), V(638), Viano(639), T2, Vario, Vaneo(414)

xentry-das-vans

Truck Support List:

Actros963/4, Actros2,3, AtegoIII, AtegoII, AxorII, Eonic, Zetros, Actros, Atego Light, Atego Heavey, HPN M96, Atron, HPN M2000, SKL, FSK, Further model series

xentry-das-trucks

Unimog models:
U20, UGN, UHN

xentry-das-unimogs

Bus models:

TRAVEGO, INTOURO, INTEGRO, CITARO, CAPACITY, CITO, TOURISMO, O350/ O403, CONECTO, O404, O405- O408, Minibus, OC500, TOURO, TOURINO, MBC, MULITEGO, O500, O500/ OH, OH, OH368, OF, OF384, LO, O400, FURTHER MODEL SERIES

xentry-das-bus

Super Sports Cars:
SLR(199)

xentry-das-super-sport-car

Smart models:

Fortwo 450, Fortwo 451, Fortwo 452, Fortwo 454

xenry-das-smart

 

What models Xentry / DAS cannot do?

You will also see some MAYBACH,SETRA, COBUS, MITISUBISHUI FUSO models (belonging to Mercedes-Benz Group) in XENTRY/ DAS, but SD connect c4 or star c3 cannot support it.

Disabled MAYBACH,SETRA, COBUS, MITISUBISHUI FUSO models:

xentry-das-models-failed-1

xentry-das-models-failed-2

xentry-das-models-failed-3

xentry-das-models-failed-4

What models waiting for tests?

The models should be done with SD Connect C4 theoretically. But they have not been tested yet by users in fact.

xentry-das-not-tested

WIS error “No write access for installation folders”

When I started installation of MB Star diagnostic WIS standalone 01/2012 on DAS 03/2012 (clean install) on Windows Xp Pro ENG with 1G virtual drive. i did standalone key first, and used 1st DVD and used SDSwitch.
i got the error message “no write access for the specified installation folders ! ”

wis-no-write-access

First, share some tips/ solutions i found on forums:

  1. Extract all the images in a folder for each dvd

Or use the virtual drive and mount the 2 images

Use pwr iso Kolo

 

  1. First install WIS standalone

As a part of MB SD Connect C4 DAS x 2012

Then mod d2ksetup

 

  1. Un-Install ANYTHING > Use the CleanEWAInstallation.vbs> Reboot > DELETE any Folders witch they remain > Re-Install again!

Good luck

Cheer2

 

Then i found the problem is “Information at 15:36:43 : Executing in CMD: cacls C:\Programme\ewa /T /E /G U|_ytkownicy:F

 

WIS installer did not recognize diacritics – should be “Użytkownicy” not “U|_ytkownicy”

 

So I changed name “Użytkownicy” to other word without diacritics – for example to “Users” or “Uzytkownicy”. To solve it, ran compmgmt.msc and went to “Users and local groups” ->”Groups” and rename “Użytkownicy”.

 

Finally SOLVED!

 

It is said that it’s possible to install standalone WIS on any language version of WINXP.

MB SD Connect C4 dead, not power up solution

Share an easy way to repair SD connect c4 multiplexer if your multiplexer is dead, not powering up via any adapter cable.
NOTE:
TRY AT YOUR OEWN RISK!
First open the MB SD C4 main unit. Slide PCB out a little bit, from the connector side, so you can see the units buttons wiring. Carefully pry the lock out & up, after that you can pull the wiring and PCB out.
sd-connect-c4-not-power-up-1
Then Open 4 Main PCB screws, Carefully wiggle the PCB off from another, it might be pretty tight, so carefully, side from side!
sd-connect-c4-not-power-up-2
sd-connect-c4-not-power-up-3
Disconnect the LAN cable, carefully, pretty easy to break the small clip.
sd-connect-c4-not-power-up-4
Then you can disconnect the Connector PCB, very carefully, might be really thight! Again slowly from both sides. You now have access to the small Fuses.
sd-connect-c4-not-power-up-5
sd-connect-c4-not-power-up-6
You can use multi-meter to see if they work, usually the LAN connector side 5A is burnt. So desolder the broken one, install new & enjoy your powering up mux again!
This repairing above requires experienced and professional techniques; or you are suggested to buy a cheap clone MB SD Connect C4 of high quality to replace it. Google to get the good one. I helped to put the first site here for you (no affiliation to the vendor)
(special thanks to JarsaR)

SD Connect C4 error on Mercedes Tourismo bus

Mercedes Benz MB Star diagnostic SD connect c4 cannot power on when connected with Mercedes Tourismo bus? Mb star c3 get communication error also when connected to Tourismo? Here’s the customer solution of Mercedes Tourismo bus diagnosis or programming.

 

Multiplexer complaints:

“I have tried 2 different sd connect c4 on Tourismo buses and sd connect does not power on.
In the meantime those MB sd connect C4 works normally to any other MB Truck and car.
also on Tourismo have check MB Star C3 and works normally.”

 

Device used:

SD connect c4

 

You should check:

bus with OBD
pin 4 + 5
both must be connected and ground

In SDConnect “-” is 5 pin only. There is 4 contact not used in 16pin OBD connector.

 

 

Communication complaints:

“i’m getting an communication error when connecting xentry to a Mercedes tourismo.”

Tourismo-bus-communication-error-1 Tourismo-bus-communication-error-2 Tourismo-bus-communication-error-3

Device used:

Mb Star c3 multiplexer

 

You can try:

– turn OFF/ON BUS ground switch (our remove battery – cable). FPS1 wake up and Star diagnostic recognized FPS1/VIN code.

or

– enter the DAS ATEGO truck come and place manually and then it will work perfect

 

 

Coding complaints:

“Currently the speed limit is set to 100 km/h. I’m trying to set it to higher value (with DAS using modified EOL files). On the menu it tells me that I can, because there are higher values (105 km/h. 112 km/h, etc). But when I try to set the speed limit to higher than 100 km/h it doesn’t allow me to do it (can’t save the changes). When I try to set it below 100 km/h everything goes fine.

 

Device used:

MB SD C4 mux

 

You should:

Access special settings

http://blog.mbstartool.com/2016/05/16/sd-connect-c4-error-on-mercedes-tourismo-bus

Mercedes Sprinter W903 immo battery error solution

Car problem and symptom:
I have problems with a Mercedes sprinter w903 2004 year.
I messed around with the Kirnzle tachometer and now suddenly i get start error and can not start the car.
I don’t know if the tachometer plays any role in this problem but i know the we had problems eith the battery few times because it got empty a few times and last tim3 was 15 minutes before this problem accrued. I have star bud does not show anything.

Cause:

The problem is battery.

Solution 1:

Read eeprom from ECU and HC08 immobox with EEPROM/MCU programer, Orange5,Xprog or cheap option carprog ecu programmer.

Here is the eeprom and immo pinout:

You need reading ecu eprom 95p08 and reading immo box HC08, AND you need sprinter start error repair v1.3…

sprinter-5P08C3-pinout Xprog-Temic12 sprinter

Solution 2:

Just try to virginise the ECU and program it to the IMMO with MB Star diagnostic(MB SD Connect C4).No need to read the MCU only the eeprom.

or unlock ecu in memory 5P08C3 in address 1D0 04 0F write 00 00 and with Star diagnostic programming.

How to virginise?

5P08C3 in address 1D0: 04 0F write 00 00 and you have virgine.

Hope they helps.

http://blog.obdii365.com/2016/05/10/sprinter-95p08-eeprom-and-hc08-pinout/

SD connect C4 error SDnetControl “no signal”

Can the old MB SD Connect C4 multiplexer work with the new XENTRY/DAS, etc.? Here is a case ans solution also, which helps error SDnetControl “no signal”.

Background:
2015.12v MB SD C4 software cannot work with 2013 sd connect c4 diagnostic system.

Operating system:
Windows XP

Error interface:
No signal
sd-c4-no-signal-1

sd-c4-no-signal-2

Self test results:
Selfdiagnostic
==============

ERROR:?Device?’100925?(2)’?isn’t?in?state?available

Device:?SDconnect/eCOM
Toolkit-Resultcode:?-1
Testresult:?0
Number?of?errors:?1
Number?of?warnings:?0

—>
Go to learn
“How to setup SD C4 software in HDD/ SSD”
Video guide:

Main Steps:
Set date and time same as the current
Step 1 – Run StartKeyCenter
Step 2 – Action to avoid Xentry reactivation
Step 3- Run Get Hardware ID
Step 4 – Run EPC & WIS
Step 5 – Add “license” to registry
Step 6 – Run EPC & WIS with new password
Step 7 – Network setup
Step 8 – Run SDconnect Toolkit
Step 9 – Diagnosis

For details of SD C4 xentry/das, epc, wis activation(setup), pls refer to
http://blog.obdii365.com/2016/03/23/activate-mb-sd-c4-2016-03-das-xentry-on-win8-via-wifi-and-lan/

MB SD C4 failed to read auto MAP data solution

One of the Mercedes MB Star diagnostic MB SD Connect C4 user failed to read auto repairing information/ data with EPC.net software. Here’s the proper solution provided.

 

Symptoms:

– Map data cannot be read.

EPC-error

– or EPC Warnung: Die Berechtigung zum Lesen dieser Information fehit 

(Warning: The permission to read this information is missing)

Auto data for car cannot be read.

 

 

Solution by experienced technicians at obdii365.com:

Send the LAN ID to our engineer and then re-activated

 

Detailed steps to activate EPC:

Run “EPC & WIS” on Desktop and Login with user name: admin & password: 12345

Go to “server”-> “edit the access authorization

Copy current MAC address (LAN ID) and send to our engineer

Open notepad to copy the new EPC & WIS password.