Tag Archives: ktag v2.23

Ktag fw 7.020 Ksuite 2.23 vs Ktag 2.24 vs Ktag 2.25

I’ll chip in my few words of Ktag 7.020 software comparison including Ksuite 2.23 vs Ktag 2.24 vs Ktag 2.25.

 

Ktag 7.020 is the newest firmware version tested by professionals.

 

You might read some posts like below:

 

Ktag 7.020/2.22 no gpt and limited denso NEC.
Ktag 7.026 so “with” super socked(the 30 writs version) does GPT and all Denso NEC.

 

Also 7.026 is more stable to work with.

 

FORGET IT!!!!!!!!!!!!!!!!!!!!!!!!!

 

Just marketing trick !
there is no any difference with GPT and Denso
ktag FW 7.020 working same as FW 7.026 !
but FW 7.026 not have all protocol active and working very slow with china SD card !
For ktag clone masters, go to KTAG FW 7.020!!!!!

Version 1: Ktag firmware 7.020 with item no.SE135

se135-ktag-ktm100-7.020-pcb-1

se135-ktag-ktm100-7.020-pcb-2

Version 2: Ktag firmware 7.020 with item no.SE135-B

se135-b-ktag-firmware-7.020-pcb-1

se135-b-ktag-firmware-7.020-pcb-2
(HOTTEST) Ktag 7.020 Ksuite Version 2.23:
Improved checksum correction for family 532 (FIAT MARELLI MM8GMK SPC564A80 CAN)
Added new file type for family 535 (MAZDA DIESEL DENSO RENESAS SH725X MY2015 CAN)
Added new file type for family 537 (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN)

 

Compared to kess 2.08, kess v2 2.23 adds new protocols:
480, 427, 512, 370, 182, 232, 423, 223, 484, 492, 515, 518, 503, 260, 522, 345, 438, 300, 280, 538, 372, 437, 511, 534, 365, 299, 513, 493, 321, 329, 497, 523, 279, 349, 539,
500, 432, 291, 309, 417, 366, 455, 356, 502, 496, 330, 519, 464, 475, 429, 292, 416, 524, 504, 476, 514, 495, 276, 385, 478, 320, 516, 494, 525, 483, 482, 224, 295, 458, 410,
461, 462, 463, 537, 479, 326, 325, 536, 486, 471, 460, 240, 431, 433, 498, 487, 506, 445, 490, 526, 535, 531, 302, 285, 472, 183, 162, 481, 358, 521, 527, 528, 529, 530 , 344,
474, 448, 353, 517, 470, 510, 501, 459, 533, 499, 468, 467, 466, 477, 465, 469, 473, 505, 310, 520, 488, 489, 424, 508, 507, 444

Ktag 7.020 Ksuite Version 2.24:
The latest update of the software introduces new Families:
KESSv2
CAR
New Family 541 (LAND ROVER 3.0SDV6/4.4SDV8 BOSCH EDC17CP55 CAN)
New Family 542 (LAND ROVER 2.0TD BOSCH MEDC17.9 CAN)
TRUCK
New Family 543 (CUMMINS INTERNATIONAL TRUCKS CM2350A CAN)
TRACTOR
New Family 544 (TIGERCAT TRACTOR BOSCH EDC17CV41 CAN)

Ktag 7.020 Ksuite Version 2.25:
Improved onscreen message management

 

Ktag 7.020 is working perfectly with Ksuite 2.23:

http://blog.obdii365.com/2017/06/16/ktag-v7-020-read-2013-opel-insignia-edc17c59/

Ktag 7.020 EU Clone and China clone which to choose

How much do you know about Ktag firmware 7.020 eu clone & China clone? And which one is better for ecu programming & remapping? This write-up will tell you all about it. Enjoy!

 

Ktag v7.020 eu clone:

 

K-tag eu with blue board:

euro-Ktag-Clone-pcb-blue

Eu ktag clone with red board:

ktag-eu-clone-pcb-red

Ktag eu clone with purple pcb:

v7.020-ktag-eu-clone-pcb-purple-1

v7.020-ktag-eu-clone-pcb-purple-2

v7.020-ktag-eu-clone-pcb-purple-3

Note: the purple ktag is the newest eu version with firmware v7.020.

 

Ktag v7.020 China clone:

 

Ktag 7.020 china clone with blue PCB:

se135-ktag-ktm100-7.020-pcb-1

se135-ktag-ktm100-7.020-pcb-2

Src: http://www.obdii365.com/wholesale/v7020-Ktag-ecu-programming-tool-no-tokens-limitation.html

Ktag firmware v7.020 from China with green PCB:

se135-b-ktag-firmware-7.020-pcb-1

se135-b-ktag-firmware-7.020-pcb-2

Src: http://www.obdii365.com/wholesale/v2-23-ktag-ktm100-ecu-programming-tool.html

 

Ktag fw 7.020 abilities:

ktag-firmware-7.020-ksuite-2.23

Ktag firmware 7.020 ksuite 2.23

Language: Italian Deutsch English French Portuguese Spanish
No tokens limitation!

No checksum error!

Vehicle: Car, Motorcycle and Truck ECU Programming
ECU support: add 100+ ecu types, incl. New models like Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU, Toyota 76F, GPT and Toyota Denso ECUs, etc.

 

Add New File type (FENDT/JCB/VALTRA TRACTOR BOSCH EDC17CV41 SISU ENGINE CAN
The important note:

If you have bought old KTM100 KTAG V7.003 and want to update to KTAG V7.020, please send the whole package back to http://www.obdii365.com/, and pay 140USD for ktag firmware update.

 

* ktag 7.003 vs ktag 7.020:

http://blog.obdii365.com/2016/11/16/ktag-china-clone-v6070-vs-ktag-eu-clone-v7020/

 

Ktag Firmware 7.020 Review:

 

Here are reviews of Ktag fw v7.020 clone.

 

(Big thanks to all users’s feedback)

 

I try with edc16c31 smart 451, read write in bdm ok with ktag, read write ok in obd with kess.

 

I tested with a lot of edc17 in these day and read and write without problem.

 

I made a video with a edc17c50 bmw 120d f21 with gpt, read and write ok.
I have a fiat edc17c69 virgin (without software inside), this I can’t read.

 

My Ktag 7.020 is able to read and write EDC17C69

 

7.020 version runs faster and more stable.

 

Ktag 7.02 good working. no problem.

 

Ktag master 7.020 displays diagrams via words, not pictures. It’s better to understand0

 

I tried to read Bosch edc17c69 gpt Fiat 500X and not working, with ktag ori read and write ok.

 

I read a lot of edc17 and few edc17 with gpt and all read and write ok maybe there is a bug in sw/fw from alientech.
virtual reading is = servidor ALIen.
virtual reading id ecu , and download firmware.
Not real soft.
uds vag =

 

I compared 7.020 with my old 7.003. KTAG fw 7.020 adds 100+ ECU types and supports new car models e.g. Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc. It should be a good budget i think.

 

The clone Ktag 7.020 can read 2013 Opel Insignia EDC17C59:

http://blog.obdii365.com/2017/06/16/ktag-v7-020-read-2013-opel-insignia-edc17c59/

 

http://www.autoobdtool.fr

How to Set up Ksuite V2.23 for Ktag firmware v7.020

This is the installation guide of Ktag firmware 7.020 Ksuite ecu programming software 2.23 master version.

 

V2.23 Ktag firmware 7.020 new features:

 

1- More languages available

KTAG fw 7.003: English, Italian, Portuguese

KTAG fw 7.020: English, Italian, Portuguese, French, Deutsch, Spanish

 

2- More ECUs and cars can be tested with

KTAG fw 7.020 adds 100+ ECU types and supports new car models e.g. Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.

 

3- Better wiring description

Ktag master V7.020 displays diagrams in words, not pictures

 

4- Runs faster and more stable

 

The important note- there are two versions of Ktag firmware 7.020 with different PCB design:

Version 1: Ktag KTM100 v7.020 with item no. SE135

ktag-ktm100-7020-pcb-1

ktag-ktm100-7.020-pcb-2

(HOT) Version 2: Ktag v7.020 firmware with item no.SE135-B

ktag-7.020-pcb-1

ktag-7.020-pcb-2

Ktag firmware 7.020 not only differs from PCB design but also ktag software installation.

 

This is the ktag v7.020 (SE135) installation guide:

This is the ktag v7.020 (SE135-B) installation guide:

How to install V2.23 Ktag firmware 7.020:

 

Ktag 7.020 Ksuite 2.23 Windows 10………..need LUCK

Ktag 7.020 Ksuite 2.23 Windows 8………..need LUCK

Ktag 7.020 Ksuite 2.23 Windows 7…………Confirmed!

Ktag 7.020 Ksuite 2.23 Windows XP…………Confirmed!

 

For detailed installation instruction of v2.23 ktag fw 7.020, please go on your reading.

 

This is for ktag fw 7.020 (SE135) only!!!

 

Disable network connection

 

Open disk E: ktag v7.020

Open READ ME notepad to get the installation instruction

Open ksuite_222_v2 setup

 

Setup Ksuite:

click on Next

click on Next

click on Install

install-ktag-7020-8

Installing ksuite…

Accept all terms

Select a language for installation

install-ktag-7020-9

Install driver:

click on Next

click on Next

click on Next, ready to install

Installing

Usb device drv installed successfully

install-ktag-7020-10

Finish installing Ksuite

 

Launch Ksuite

Select a language for use

install-ktag-7020-11

Exit ksuite

 

Open Ksuite properties

click on Find target…

Copy all files/folders in E:/ksuite 2.23

Paste in C:/ksuite 2.23

Confirm to replace all

 

Open disk E:/driver

Open Driver_USBDEVICEDRV setup

Select an installation language

Install driver:

click on Next

click on Next

click on Next, ready to install

Installing

Usb device drv installed successfully

install-ktag-7020-12

Open disk E:/RESET TOKEN

 

Found new hardware wizard: install software for DataLoader

Install…automatically, click on Next

Installing

Finish installation

install-ktag-7020-13

Open Ksuite on Desktop

It’s ktag ksuite 2.23

install-ktag-7020-14

Ktag firmware 7.020

Go to Option to choose/change a language for use

install-ktag-7020-15

Six languages available

Choose car icon

Select ECU to test, here Volkswagen Caddy IV Bosch EDC17CP20

install-ktag-7020-16

install-ktag-7020-17

install-ktag-7020-18

install-ktag-7020-19

Check motorcycle, truck,tractor,boat etc ecu lists

install-ktag-7020-20

install-ktag-7020-21

install-ktag-7020-22

install-ktag-7020-23

install-ktag-7020-24

install-ktag-7020-25

install-ktag-7020-26

install-ktag-7020-27

Done!

 

So, the new ktag 7.020 works no issues with cars, trucks, motors, tractors, boats ECU reading/writing.

http://blog.obdii365.com/2017/06/15/install-v2-23-ktag-firmware-v7-020/