Tag Archives: GM MDI

GM MDI USB and WiFi Not Connecting Solution

Here are all solutions aimed to help fix GM MDI multiple diagnostic interface connection/communication issues (connection by usb, wireless ethernet, wired ethernet)… big thanks to all contributors and obdii365.com
For mdi not connecting…
First, you should make sure that the MDI Manager software should be installed on the PC and the MDI must be powered up before you use it to communicate.
Also the MDI should be configured for wired ethernet or wireless communication. If the USB is available, the MDI will connect by using the USB and if not, the MDI will connect by using wired ethernet and if neither of them is available, the MDI will connect by using wireless.
If the MDI can not communicate with the MDI, you should check the cables if they are securely attached to the MDI, if the MDI has completed its power up sequence, if the connector pins are clean and if the MDI Manager software is running.
In detail…. mdi connection can be discussed in the following 4 parts:
Part 1: GM MDI USB connection
Part 2: GM MDI connection by wireless ethernet
Part 3: GM MDI connection by wired ethernet
Part 4: Tech support: GM MDI not connecting
Part 1: GM MDI USB connection
And if you connect them by USB, you need to check the MDI USB connection is detected by windows. About the solutions, you can connect the MDI to the PC USB port and power up the MDI. Open the Network and Dial-up Connections Window from the Windows Control Panel. Then check for the device name ETAS USB Remote NDIS Network Device. If it is not running, check all USB ports on the PC and verify that the MDI is powered on.
GM MDI Manual: What if MDI fails to connect on USB
interface?
Check USB cable connections.
Check Firewall Settings on your PC.
Verify a USB Hub is not being used (MDI has a fixed USB address).
Verify that only one MDI is connected to your PC using USB.
Verify the USB driver has been installed on the PC (look for device name ‘ETAS USB Remote
NDIS Network Device’ under Network Connections).
Try connecting to other USB ports on the PC.
Part 2: GM MDI connection by wireless ethernet
If you connect them by wireless ethernet, you should make sure that wireless communication is enabled and the IP configuration is properly set using the MDI Manager software. Then what you need to check is that the USB cable is not plugged in, the MDI is not being used via wired ethernet and the wireless card is properly seated in the MDI. You can contact your IT department and check that your PC is detecting the wireless access point and the correct security settings have been configured for the MDI.
GM MDI Manual: What if MDI fails to connect on Wireless
interface?
Check the wireless card is properly seated in the WiFi GM MDI.
Confirm LEDs on the wireless card are lighted when the MDI is powered.
Verify the MDI and PC are within range of the Access Point or Router.
Verify that the PC is connected to the Access Point or Router.
Verify signal strength of the wireless network from the PC.
Check Firewall Settings on your PC
USB connection takes precedence, unplug USB cable.
Wired Ethernet connection takes precedence, unplug Ethernet cable.
Connect to MDI using USB and run MDI Manager to verify the Wireless Settings are
configured correctly.
o Wireless interface is enabled.
o AP settings configured for proper security (authentication, encryption).
o Signal Quality (fair, good, excellent) indicates connected to AP.
o The MDI, PC and AP are on the same subnet
o If using static IP, verify the IP Address and Subnet mask are correct (supplied by network
administrator.
Part 3: GM MDI connection by wired ethernet
And if you connect then by wired ethernet, you need to ensure that the wired ethernet communication is enabled and configured using the MDI Manager software. Then you should check that the USB cable is not plugged in and the MDI device detects wired ethernet activity by viewing the lights blinking on the wired ethernet port of the MDI. And also you can contact your local IT department and check that the MDI and the PC are on the same subnet.
GM MDI Manual: What if MDI fails to connect on Wired
Ethernet?
Check Ethernet cable connections.
Check Firewall Settings on your PC.
Verify the MDI and the PC are cabled into separate LAN connections on the same network.
Verify that the PC is properly configured and can communicate on the network.
USB connection takes precedence, unplug USB cable.
Connect to MDI using USB and run MDI Manager to verify the Wired Ethernet Settings are
configured correctly.
o Wired Ethernet interface is enabled.
o If using static IP, verify the IP Address and Subnet mask are correct (supplied by your
network administrator).
Part 4: GM MDI not connecting
This is professional technical support for the error ” not connected to MDI”.
All what you need do is to refresh the GM MDI firmware
  1. Press this button and connect the power:
gm-mdi-not-connecting-1
  1. Keep press this button and connect it to power, the power light will be on, wait about 10 seconds:
gm-mdi-not-connecting-2
  1. When all light is on, then you can release the button, and it will enter firmware refresh status:
gm-mdi-not-connecting-3
  1. Connect GM MDI with your PC via USB cable, prepare to refresh the firmware:
gm-mdi-not-connecting-4
  1. Open “GM MDI Manager”, choose “Recover”:
gm-mdi-not-connecting-5
Tech support from http://www.obdii365.com/

GDS2 v19.0.04100 Software Download FREE for GM MDI

Free download GDS2 v19.0.04100 version with GDS2Java v14.0.00000 copied from original GM MDI software installation:
https://mega.nz/#!tCZV3aSa!tKHq4JIDlL3kgLgmPeL2WIL8xO7W2qWhrPu0mCo1GxU

If you want download Deliverable GM Global & Opel-Vauxhall 2017.11 packages you can see this link:
How To install?
How To use deliverable packages?
  1. install GDS2Install then install GDS2JavaInstall
    4. Put the zip file called deliverable_OpelVauxhall v2017.5.0 into the below folder:
    C:\ProgramData\GDS 2\PersistentData\Downloads\DataBackups
    5. Open GDS2 and click ManageDiagnostics Packages
    6. click on browes
    7.then go to C:\ProgramData\GDS 2\PersistentData\Downloads\DataBackups
    8.then click on deliverable_OpelVauxhall v2017.11.0 click on open
    9 gds2 will restart
Test successfully?
Good job here see the photo …. the only problem I have with that is javom- problem with MDI interfae when I install the version of MDI -8.3.103.117 after the restart VmWare application that passthru MDI is not ready. When connecting Bosch Kts Pasthru then is ok, Abritus Audio Passthru and that’s ok. MDI-Passthru is not ok not see it.
gds2-v19-download-1

 

gds2-v19-download-2

 

gds2-v19-download-3

 

gds2-v19-download-4
Note: this be installed with global tis v32 but gds2 packed 2011 year establishes
For tech2win you can try with an other emulator.exe found on this forum cartechnology.co.uk.
Because emulator tech2win on this vmware don’t propose To choose interface.
If you want to use GDS2 on GM MDI with relief, you’d better get a tested version:
gm-mdi-gds2-v19-download-success-1

 

gm-mdi-gds2-v19-download-success-2

 

gm-mdi-gds2-v19-download-success-3

 

gm-mdi-gds2-v19-download-success-4
It’s confirmed to work with MDI interface without any issue!
http://blog.obdii365.com/2018/12/25/download-gds2-v19-0-04100-for-gm-mdi/

GM MDI GDS2 Tech2Win Windows 7 Sata HDD for GM up to 2018

The latest GM MDI GDS2 Tech2Win software V8.3.103.39 for Vauxhall Opel Buick and Chevrolet comes in Windows 7 SATA format HDD.
Software Version: V2017.2.0
System: Windows 7 64bit

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-1

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-2

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-3

gm-mdi-gds2-gm-mdi-gds-tech-2-win-software-4

Update time: GM Global V2017.2.20
Used for: Both China GM MDI USB version and GM MDI WiFi version scanner
Easy to use: Insert the HDD with GM MDI gds2 software into your computer; the software can be used directly with the GM MDI scanner, which doesn’t need activation by users.
GM MDI Multiple Diagnostic Interface scanner will provides the full dealer level diagnostics and programming for all Vauxhall /Opel 16 pin vehicles from 1996 to 2017, support Chevrolet up to 2018. The GM MDI scan tool diagnostic software gds2 can be installed on 2.5′ SATA HDD,  with the Win7 Operation System.

Attention please!

* Please make sure your computer supports Win7 64 bits system.
* Computer system requirements: the year after 2008, 4GB RAM
* If computer failed to boot up, please enter BOIS system and change the SATA driver to AHCI.

 

Recommended  Best quality GM MDI Interface with WiFi card:
gm-mdi-wifi-pcb-1

gm-mdi-wifi-pcb-2

gm-mdi-wifi-pcb-3

gm-mdi-wifi-pcb-4

http://blog.obdii365.com/2017/05/23/gm-mdi-gds2-tech2win-v8-3-103-39-support-gm-update-to-2018/