Tag Archives: Ford IDS V109

Ford IDS V86: Why? How to install on Win XP or Win 7 64/32bit?

Free download Ford IDS 86 without password:

Link 1: https://mega.nz/#!Js0ECICY!4VEkU6VESpUsbH2ZzeCIflmyJJiViOQYeB7F3tzlir8

Link 2: https://mega.nz/#!rFkUTIRL!NUMfu1RPdpLLs3D73bsKJDkftUfxSneO5js7FYY2iSk

Free but unknown risk…try on your own risk


Why do you need IDS V86? What’s the difference from the new version?

IDS v86 crack: install directly on Windows native, for pre-2012 vehicles

IDS new versions original: 3-day trial v91 vmware (fix the day)->v100 (other new ids )

IDS latest version: IDS v109


Source: http://www.obdii365.com/wholesale/ford-vcm-ids-v10801-full-software.html

Windows 7 32bit and 64bit: confirmed!

Compatibility: Ford VCM 2 china clone incl. SP177-C1, SP177-C, etc.

Tech support: remote installation



Important note:

IDS v86 with v81 calibration can be used for ECU programming offline to old Ford.

With IDS new versions, users can program ECUs online with their own accounts!


How to install Ford IDS V86 software:

IDS 86 Windows 7 64 bit

IDS 86 Windows 7 32 bit

IDS 86 Windows XP


In detail…


running Windows 7 64bit(suggestion from users)


using vcm2 with software version v86

without freezing or otherwise was as follows
Install v86 reboot
patch ids reboot
install calibration files reboot
install extended programming reboot
when installing I just installed in compatibility mode for windows xp sp3 and don’t have a problem, I did have an issue with the wireless because windows wanted to take over everything, its on a dell d531 with 4gb ram, which I use to run a vm image of ids 106 which chris one of the members on here posted, also running on a dell e6320 with 8gb ram, v86 in windows 64bit native and the 106 in vm. ids driver version 5112, only real problem I had was when I tried to upgrade the firmware through vm which left the vcm2 locked, used the bosch manager inside my v86 to reflash back in windows native, took about 25 min and saved my unit.


running Windows 7 32bit(suggestion from users)


Just Installed Version IDS V86 onto fresh laptop running Win7 32bit. The Patch within the the IDSv86.partXX.rar files did not work. But Loaded IDS_v86_patch worked perfect. Had to kill detection manager and probetickhandler in task manager before it worked. Checking IDS Software license Type Evaluation. Days Remaining on Licence Unknown
Will the programming feature expire after 60 days or does it need a fix or does the patch fix that?

Tested it with Ford PCM on the bench with using 3x different VCM’s.
First VCM
1. Original VCM Ver79 => V86 Worked Perfect + Programming PCM .PASS
Second VCM
This one had issue running on V53 not stable, but works great Now
2. Clone VCM Ver53 => V86 Worked Perfect + Programming PCM. PASS
Third VCM
3. Clone VCM Ver79 => V86 Work ok for diagnostics but fails to Programming PCM. FAIL


running Windows XP: (Tech support from obdii365.com)


1 Install a new fresh windows

  1. Make sure o firewall activated no antivirus
  2. Install the Ford IDS V86 Software, then reboot PC
  3. Update it if you have the upgrades files till v86.04 ( the last one )
  4. Then reboot
  5. Apply the patch and choose to be for VCM 86.01A and for what kind of tool do you have.
  6. Reboot and start the IDS V86 software for use


Hope it’s helpful.


Ford IDS 109.01 Reviews and FAQs

(03-04-2018) Download FORD VCM IDS 109.01+(Online+Offline) Calibration Native Install with Remote Support.


Ford IDS V109 link:



PC requirement:



A 64 bit operating system is required. Virtualization also needs to be enabled on your computer / laptop, most modern systems come with this enabled, if you need to enable it, this can be done through the systems BIOS.



native installation

you can use it unlimited time

installation and activation service for FREE via obdii365.com

support online programming function also included calibration file

also included incode calculator for key programming or module installation

works on all vcm1-vcm2-vcmx nano original or clone…….



* Automatic vehicle recognition

* Read & Clear Diagnostic Trouble Codes (DTCs)

* Live Data-stream with Recording & Playback Functions for Main ECUs

* Guided Fault Finding

* New Software Re-flash for Existing ECUs

* Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)

* Program New Keys (for additional fee)

* Injector Coding

* Set, Adjust or Remove Speed Governors

* DPF Regeneration

* Brake Bleeding

* Steering Angle Resets

* All Other Offline and online Dealer Functions





Ford IDS 109 Review:

109 start and work, VCM1 clone (but oldest one), Windows 7
Installation from clear Windows start, and for end
friendly, responsive, fast


make a great install to me on win 7. all I had to do is drink coffee during install. works perfect no limitation


Trusted seller. Installed and activated without problems. V109 + incode calculator. Windows 7 64bit and VCM1 original. Very happy.


Online programming work %100



Ford IDS 109 FAQs:


It VCM 1 is compatible?

Yes, it can work with Ford VCM 1 clone


Works good with VCM2 clone?

I have Chinese clone VCM2 SP177-C1 and it works great with impressive speed. I would definitely recommend this guy.


Hi how about Online ? It will be work with cloned VCMII ?

can do online , work with original and clone VCMs


So just to confirm the testman.exe and other DLLs in the Runtime folder are all v109? I’ve found that many other hacked versions are build using v106 and not all features work with 2017+ vehicles. 

i know , some softwares can not work with 2017 cars , i know what to do for supporting 2017 cars .
i will change some files for it .


What is the price??? and where to?

$79.99 with free shipping, installation & activation service

The link: http://www.obdii365.com/wholesale/ford-vcm-ids-v10801-full-software.html


Someone please test 2017 f150 key programming north america model

For F150 2017 need minimum IDS and NASTF account !!!


I have a vmware version of IDS 108.07, that appears to be built on 106 based on the file versions of a lot of the DLLs in the Runtime folder. Using a genuine VCM II with the firmware, I canNOT do TCM module programming on a 2017. 

Never tried TCM on 2017+ but that’s a possibility.
All hack I’ve seen are based on v86, v101 or v106.
Never seen a hack based on v109 executables and DLLs .. that’s why I’m asking but he won’t answer that question.


What vcm2 firmware are you using ??

My point is.. all “good” clone can upgrade firmware to no problem.

On newer vehicle’s BCM replacement, the procedure requires to get configuration restored ( looks like JLR process ). After you done PMI of the said BCM you must complete that configuration restore or the BCM installation won’t be completed and so DTC will show up and/or the bcm won’t work correctly. I’m not talking about PATS functions which do need a dealer login or other tools to complete.

Once again my point is you do require firmware for this procedure on most newer cars like 2015 + focus or escape and probably other model too. Running this procedure with or older firmware will show error in the process.

Now that being said, if your software allow the use of firmware, and has the v109 testman.exe and other executable files, then it should be working. But if you are using v86 testman.exe and other executable files and DLL with odler firmware, I strongly recommend not trying to install BCMs on newer car. And so other functionality might not work too.


Here is a bcm replacement failed with firmware and IDS 107. Same I’d happening with v108 and v109. You do require newer firmware.