Tag Archives: Cummins Insite 8.2.0.184

Cummins Insite 8.0.2 Keygen Download Free

Here, download Cummins Insite 8.0.2 old version for free and Insite 8.2.0.184 tested version for security.

 

Part 1: Free version Cummins Insite 8.0.2:

Part 2: Tested version Cummins Insite 8.2.0.184:

 

 

Part 1: Insite 8.02 download on Mega

 

FREE!!! BUT NOT TESTED – UNKNOWN SECURITY

 

Insite 8.02 v1 .iso download:

https://mega.nz/#!1b5AHJ5R!emDkoD01Jous0jaVA-mBYglqr8ITqzZIQH7Aw07u9S4

 

Keygen unlock.rar download:

https://mega.nz/#!wXYGRYqD!fyrH4wxyhgA0BlMa9gEdskb8pfKlOSj2gfh3OdSZmDw

 

Incal Insite 8.x download:

https://mega.nz/#F!9HRUmRjZ!pKffYrbyobkDUw8e2Fbehg

 

FULL PACKAGES: INSITE INSTALLATION + KEYGEN UNLOCK + PATCH FILES + INCAL FOR INSITE 8.

 

What is Cummins INSITE:

 

Cummins INSITE is a Windows software application that works with Cummins Electronic Control Modules (ECMs) to diagnose engine problems, store and analyze historical information about an engine, and modify parameters of engine operation. Cummins INSITE also allows you to download an ECM calibrations to working with Cummins INCAL.

 

Insite 8.x Laptop requirements:

 

  • O.S.: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1
    • CPU: Pentium/Athlon 2 GHz or higher
    • RAM: 512 MB of system memory
    • Hard Drive: 10 GB of available space
    • Optical Drive: DVD-ROM

 

INSITE 8.0.2 Released Notes:

 

Installations upgrade capability

Upgrade from INSITE 8.0.1

Work Orders

 

Images and Templates

 

Beginning with INSITE version 8.0.1, images or templates imported from later versions of INSITE will be highlighted in the Work Order window.

 

For Example: If templates or images from INSITE 8.0.2 are imported into INSITE 8.0.1, those images or templates will be highlighted. When hovering over those images or templates, an informative message will be displayed.

 

ECM Image Analyzer

To open this new feature Right-Click on any image and select ‘Analyze Image’ to open. This can be used to view key features of an image and contains improved graphics. The current feature, or all features, can be exported to Adobe (pdf) or Excel (xlsx) file formats.

 

For Example: Duty Cycle Monitor will show a 3-D, multi-colored graph, and it can be rotated using the mouse.

 

New Features and Parameters

 

***These will only be displayed if they are supported by the calibration.

 

Crankcase Pressure Speed Derate

This feature provides the ability to enable the crankcase pressure speed derate as partof the Engine Protection special feature.

 

Inducement Override Switch

This feature provides the ability to enable the Inducement Override Switch.

 

Engine Oil Level

This feature provides the ability to set the Engine Oil Level sensor type.

 

Driver Reward Distance Reset

This feature expands Driver Reward to include the ability to reset Driver Reward every time the engine is turned off as well as to configure the distance the driver reward can be applied.

 

Multiple Load Based Speed Control Limit

This feature expands User Adjustable Fuel Economy to configure the minimum and maximum breakpoint speed offsets.

 

SAE J1939 Multiplexing

This feature has been updated to include the following parameters: Machine Interlock Switch, Desorb inhibit, and Inducement Override Switch.

 

Load Based Acceleration Control

This feature provides the ability to limit the engine acceleration.

 

OEM Simple Lockout

This feature provides the ability to derate engine speed or prevent the engine from starting when used with OEM hardware.

 

Cruise Control Type

This feature expands Cruise Control to configure the different cruise control types to achieve the desired fuel economy.

 

Intelligent Coast Management

This feature expands Cruise Control to allow the vehicle to coast further during low torque demand when the driveline is disengaged.

This feature name has been modified:

Feature name prior to 8.0.2 Feature name starting with 8.0.2

Coolant Level Sensor Engine Coolant Level Sensor 2

 

Advanced ECM Data

 

***These will only be displayed if they are supported by the calibration.

 

Engine Protection and Engine Protection Settings

These features have been updated to include Crankcase Pressure, Boost Pressure Differential and Bank Vacuum Detection information.

 

Fuel or Timing System Table Reset Component Replacement

This feature allows the adaptive learning table values to be reset after fuel or engine timing

components have been replaced.

 

Operating Systems Supported

  • Windows® 7 32-bit and 64-bit
  • Windows® 8 32-bit and 64-bit

 

 

Part 2: Cummins Insite 8.2.0.184 download

 

100% Tested & Confirmed to work perfect

 

Cummins Insite 8.2.0 tested version download:

http://www.obdii365.com/wholesale/cummins-insite-software-500-limitation.html

Tested no issues on Windows 7 32bit and Windows 10 (Run as administrator).

cummins-insite-software-500-limitation-1-1sccclw

cummins-insite-software-500-limitation-2-29ddxny

cummins-insite-software-500-limitation-3-2ltmxhg

cummins-insite-software-500-limitation-4-18ef76h

cummins-insite-software-500-limitation-5-1mnl7la

Insite 8.2.0 PC Requirements:

 

Recommend:

Platform: IBM or 100% Compatible

Operating System: Windows® 8 32-bit

Processor: 2.1 GHz or greater dual-core

RAM Memory: 4 GB or greater

Hard Drive: 2 GB or greater available disk space

Media Device: Dual Layer – Double Density DVD-ROM

Display: Minimum Resolution 1024 x 768

Keyboard: 101 Key Enhanced Pointing

Device: Windows® Compatible Device

Multimedia: PC’s that will be used for Virtual College training will require multimedia and sound capability

Other Software: Adobe Acrobat Reader v9.0 and later

Printer: Windows® Compatible

Internet Connection: DSL / Broadband high-speed

Available Ports: Two USB 2.0 Ports

 

Minimum requirement:

Platform: IBM or 100% Compatible

Operating System: Windows® 7 32-bit

Processor: 2 GHz RAM

Memory: 2 GB

Hard Drive: 2 GB available disk space

Media Device: DVD-ROM

Display: Minimum Resolution 1024 x 768

Keyboard: 101 Key Enhanced

Pointing Device: Windows® Compatible Device

Multimedia: Any Windows® Compatible Sound Device

Other Software: Adobe Acrobat Reader v9.0 and later

Printer: Windows® Compatible Device

Internet Connection: DSL / Broadband high-speed

Available Ports: See datalink adapter manufacturer for port specifications

 

 

Cummins Insite 8.2.0 Released Notes:

 

1 General Information

1.1 Upgrade capability

Upgrade from INSITE 8.1.x or install as a new program.

 

2 New Base Features

2.1 Connect Window

Cummins Service System (CSS) users will be required to enter their Cummins

Service Provider Code on the Connect window.

 

3 New Diagnostic Tests

NOTE: This will only be displayed if it is supported by the calibration.

3.1 Aftertreatment SCR System Cleaning

This test has been modified to support multiple Aftertreatment SCR Systems on

supported applications. It has been modified so that it can initiate a cleaning on

Aftertreatment 1, Aftertreatment 2, or both Aftertreatment SCR Systems.

 

4 New Advanced ECM Data

NOTE: These will only be displayed if they are supported by the calibration.

4.1 Engine Protection Settings

This feature has been expanded to display the data for Shutdown Warning Period

(time for flashing lamp) on both the RPM Derate and Torque Derate feature.

 

4.2 Engine Protection

This feature has been expanded to display information when the engine experiences

a torque derate or shutdown based on the Intake Manifold Over Pressure and the

Low Temperature Coolant Intake Pressure.

 

4.3 Stop Start Service Inhibit

This feature allows the automatic stop start functionality of a vehicle to be temporarily

inhibited.

 

5 New Features and Parameters

NOTE: These will only be displayed if they are supported by the calibration.

 

5.1 Aftertreatment Mobile Regeneration Minimum Idle

This feature allows the engine idle speed to be controlled by the engine during a

mobile regeneration. This feature also provides a monitor that displays the desired

engine idle speed during a mobile regeneration.

 

5.2 Retarder Coolant Bypass Valve Relay

This feature allows maximum coolant flow to be redirected to the driveline retarder

during braking when there is a coolant circle bypass valve installed. This feature also

provides a monitor that displays the current state of the relay.

 

5.3 PTO Speed Saved on Power Down

This Power Take Off feature has been modified to allow the manually adjusted Cab

PTO Speed to be saved when the vehicle is powered down. When PTO is engaged

and the Resume switch selected, the Cab PTO will resume to the saved speed. This

feature also provides a monitor that displays this saved speed.

 

5.4 Engine Fuel Supply Pump Filter Restriction Level Warning Limit

This feature allows setting the Engine Fuel Supply Pump Stage 1 and Stage 2 Filter

Warning Limits.

 

5.5 Low Fuel Level Warning Configuration

This feature allows setting the thresholds and criteria that can trigger low fuel level

warnings.

 

5.6 Aftertreatment System Information (1 and 2)

These features provide the Aftertreatment System Part Number and Serial Number

Information under System ID and Dataplate.

http://www.obdii365.com/producttags/cummins-insite-820184.html

How to use INSITE 8.2.0 for Nexiq or Xtruck USB Link

Cummins INSITE 8.2.0.184 truck software is compatible with Inline 5, Inline 6, DPA5, Nexiq and Xtruck data link adapters.  Here’s the guide on use INSIET 8.2 with Nexiq usb link.

 

Procedure:

Preparation:

Download INSITE 8.2.0 patch

Cummins insite 8.2.0 lite version patch

Cummins insite 8.2.0 pro version patch

 

Step 1: Install Nexiq drivers

insite-820-nexiq-0-20dww0b
Run USB-Link_9.5.0.1 setup on desktop as Administrator

insite-820-nexiq-1-1v5dc7l
Click Next to start install NEXIQ USB Link drivers
Accept copyright notice
Click Next

insite-820-nexiq-2-2auzadq
Installing Microsoft Visual C++ 2005

insite-820-nexiq-3-2iswg05
Click Next to install Device Tester Setup
Accept license agreement

insite-820-nexiq-4-1ffqoe5
Tick Device Tester Install, click Next

insite-820-nexiq-5-1gayjjp
Install software on C:/Program Files/NEXIQ/Device Tester,click Install
Click Next
Device tester setup installation completed. Click Finish

insite-820-nexiq-6-zjvodk
Accept windows security warning
NEXIQ USB link drivers installation completed.

insite-820-nexiq-7-vua8d8
Click Finish.
Restart computer

 

Step 2: Install INSITE 8.2.0.184

insite-820-nexiq-8-1vzyeq8
Extract INSITE8.2.0.184 zip folder to desktop
Open INSITE 8.2.0 folder

insite-820-nexiq-9-1zkk1hf
Open autorun

insite-820-nexiq-10-1dgj58x

insite-820-nexiq-11-1h64ulj

insite-820-nexiq-12-yomipp
Click Manual Install Options->Required Installs->Install INSITE

insite-820-nexiq-13-xtewt1
Select software language

insite-820-nexiq-14-216lc4s
Install Microsoft.NET Framework 4.5 Full, INSITE data pack, INSITE CSS service

insite-820-nexiq-15-1t8nqyp
Verify PC date and time, click Next
Accpet license agreement

insite-820-nexiq-16-2crm49f
Finish install INSITE 8.2 software

 

Step 3: Activate INSITE 8.2.0

Run Cummins INSITE software on dekstop as Administrator
Accept 2 license agreements
Exit INSITE software
Delete all INSITE files on desktop

insite-820-nexiq-17-2i058bp
Download and paste the Cummins INSITE 8.2.0 pro or lite version patach on desktop

insite-820-nexiq-18-1i0pl89
Run “820 PRO” and send the ID to your dealer

insite-820-nexiq-19-1cn6o97
The dealer will send you user name and activation key

insite-820-nexiq-20-2eshb8a
Paste user name and registration key to corresponding area

Click on Register.

Activation success.

insite-820-nexiq-21-2ga5x0s

Now you can use INSITE software with NEXUQ/Xtruck USB Link hardware.

www.obdii365.com

 

Cummins Insite 8.2.0.184 Installation and Activation

Here are the step-by-step guides on installing & activating Cummins Insite 8.2.0.184 Pro version and Lite (Count) version on Windows 10 (including patch download).
Software version: 8.2.0.184
cummins-insite-820-1
cummins-insite-820-2
Difference between insite 8.2 Pro version and Lite Version:
Pro version including all function of Lite version, and also including Automotive Calibrations Data Cummins INCAL and Reflash ECU data, read & write ECU
Multi-language available: English(united states)/Chinese(simplified)/Danish/Dutch/Finnish/French/German/Italian/Japanese/Korean/Norwegian/Portuguese/Russian/Spanish/Swedish/Turkish
Compatible truck diagnostic tools:
1.Cummins INLINE 6 Data Link Adapter
2.Cummins INLINE 5 Data Link Adapter
3.DPA5 Dearborn Protocol Adapter 5 Heavy Duty Truck Scanner
4.NEXIQ USB Link
5.XTruck USB Link
6.AUGOCOM H8 Truck Diagnostic Tool
How to Install & Activation Cummins INSITE 8.2.0 Lite (Count) version?
How to Install & Activation Cummins INSITE 8.2.0 Pro version?
Operating system: Windows 7-Windows 10
Windows 10 you should disable anti-virus program and run software as administrator. 

Part 1: Install & Activate Cummins INSITE 8.2.0 Lite version

First you need to download patch for Lite version
Step 1: Install INSITE 820 Lite software
Open software folder
install-insite-820-lite-version-1
Extract INSITE8.20.184 zip file to desktop
Open INSITE8.20.184 folder
install-insite-820-lite-version-2
Open autorun
install-insite-820-lite-version-3
install-insite-820-lite-version-4
install-insite-820-lite-version-5
Select Manual Install Options->Required Installs->Install INSITE
install-insite-820-lite-version-6
Select INSITE language
Install Microsoft.NET Framework 4.5 Full
install-insite-820-lite-version-7
Install INSITE Data Pack
install-insite-820-lite-version-8
Accept INSITE Data Pack license agreement
Click Next
install-insite-820-lite-version-9
Finish Install data pack
install-insite-820-lite-version-10
Install INSITE CSS Service
Click Next
install-insite-820-lite-version-11
Verify PC date and time.
INSITE contains features which are dependent upon an accurete PC date and time. Please verify that
the date and time settings are correct before continuing the installation.
Tick “I have verified hat the date and time settings are correct”
Click Next
Accept license agreement
Click Install
install-insite-820-lite-version-12
Finish install INSITE software
This will generate Cummins INSITE software on desktop
Step 2: Activate INSITE 8.2 Lite version
Run Cummins INSITE software as administrator (very important)
Accept 2 license agreements
install-insite-820-lite-version-13
Select Simulator Mode
Exit INSITE software
install-insite-820-lite-version-14
Delete all files on desktop
install-insite-820-lite-version-15
Download INSITE 820 Count patch above and paste it to desktop
install-insite-820-lite-version-16
Run “820 Count” file and send the SN (hardware ID) to your dealer
install-insite-820-lite-version-17
Dealer will send you user name and activation key
install-insite-820-lite-version-18
Enter user name and activate here
Click on Register
install-insite-820-lite-version-19
Registration success. Now you can use Cummins Insite Lite version.

Part II: Install & Activate Cummins INSITE 8.2.0 Pro version

First you need to download patch for activation as well
Step 1: Install INSITE Pro software
Extract INSITE8.20.184 pro zip file to desktop
Open INSITE8.20.184 folder
Open autorun
Select Manual Install Options->Required Installs->Install INSITE
Select INSITE language
Install Microsoft.NET Framework 4.5 Full
Install INSITE Data Pack
Accept INSITE Data Pack license agreement
Click Next
Finish Install wizard
Install INSITE CSS Service
Click Next
Click Next
Verify PC date and time.
INSITE contains features which are dependent upon an accurete PC date and time. Please verify that
the date and time settings are correct before continuing the installation.
Tick “I have verified hat the date and time settings are correct”
Click Next
Accept license agreement
Click Install
Finish install INSITE software
Step 2: Activate INSITE 8.2.0 Pro verison
Run Cummins INSITE software as administrator (very important)
Accept 2 license agreements
Select Simulator Mode
Exit INSITE sofware
Delete all files on desktop
install-insite-820-pro-1
Download Cummins INSITE 8.2.0 pro pacth and paste it on desktop
install-insite-820-pro-2
Run “820 Pro” file and send the SN to the dealer
install-insite-820-pro-3
Dealer will send you User name and register key
install-insite-820-pro-4
Paste user name and register key here.
Now you have activated the INSITE Pro software.
Start using the software.