Tag Archives: Cummins Inline 5

Cummins Inline5 Data Link and Insite 7.62 FAQs

Q: Just received a Cummins inline 5 data link adapter and was wondering if it needs to be plugged into an ECM to power on.
A: Yes most of the adapters need the truck power to use them so it will power the adapter off the six or nine pin connector in the truck.
Q: Anyone have an idea how to get Allison Doc 2017 to work with Inline 5?
A: Inline 5 work on J1708 an old J1939, on CAN 250K and 500K dont work, you need a dual can (can1 and can2) rp1210 interface (DPA5 etc).
Q: Any one can tell me how to set INLINE 5 for DETROIT DIESEL DIAGNOSTIC LINK ?????
A: First make sure you have the drivers installed for the Inline 5 on the PC you are using for the DDDL software.
In DDDL software select Tools – Options, the in dialogue box select the connection tab. From there click on SID configuration button. If your Inline driver is installed you should see it on the list in the SID configuration dialogue, select it the click OK.
That’s the basic way to do it in V 7.04 of DDDL regardless of adapter type.
I bought one but can’t figure out how to install the program on my laptop before hooking the unit to my truck.
Q: How to setup Commins Insite 7.5 com port?
A: Here you go…
cummins-insite-75-com-port
Q: How to activate the Cummins INLINE 5 INSITE 7.5 7.6?
A: look here
  1. You will get this windows to tell you need to activate it:
  2. Click “OK” and then you can get the ID, and then please send us @OBDII365.COM the ID
  3. We will send back the activation code to you, and then the activation is OK.
Noe that free activation service only be available for those bought Inline 5 from obdii365.com
Q: hi.i bought a cummins inline 5 adapter online.when i connect it to a truck the laptop screen says new device attached and starts the software installation.i have the cummins cd i got with the unit in the cd drive but the computer says no software found.the connector lead from the laptop to the inline adapter is a blue usb cable.can anyone help me with this please?
A: M8, the pc will not find the drivers because they come in an executable manner. You can browse the cd and look inside for the folder named inline 5. Go and find the drivers for 32bit or 64, depending on your OS. Execute them and hook up your adapter – this time the hardware mannager should find them.!!! Regards
EDIT: Got it working.i reinstalled inline 5 from the cd and it still wouldn’t recognise it.i went in to the system devices in control panel and selected to install the driver from their and selected the cummins cd in the cd drive and it finally installed!
Q: installing the driver executable works ok, but after plugging the adapter Windows XP doesn’t find and install anything. Letting it search on the net for “suitable drivers” installs FTDI USB-to-serial drivers…
A: You just need power for the adapter no data to be installed.
The path for the drivers is C:\windows\system32\drivers\uausb.sys
My friend bought Usb link and Inline 5 from china and had a lot of problems with them. He had Nexiq exchanged twice and still is not connecting or just disconnecting. Inline adaptor was the same doesn’t want to connect or disconcerting all the time.
Q: Can someone please help me with a program called cummins calterm,or at least help me out on how to calibrate a ECM after changing the eprom 28c64, the unit fails to communicate with the the cummins insite when I try to put in the new program by the way this is a celect plus ECM
A: Cummins Insite will only communicate with a calibrated ECM, an uncalibrated ECM will bring up a prompt for the user to install a calibration.
With a new chip, the ECM will probably be “seeded”, it needs the base file installed so that Insite will recognize it as a blank “ROM booted” ECM.
To use Calterm, you need to obtain the “E2M” or “ECFG” file for the calibration you are using, these files have the ECM memory locations for the several thousand differenet parameters that make up an ECM calibration.
Calterm uses a different security than Insite, I doubt anyone has cracked it, I have not seen a keygen, or anyone offering registration codes Renesis
Most features can be enabled and disabled using Insite, search the forums, you can get the software and register it, you just need the laptop and cables and inline adaptor. if the feature cannot be disabled using Insite – there is a good reason for it
Q: How can I obtain the “E2M” or “ECFG” file for the calibration? Is it possible to extract them from the Incal DVD, or from the ECM itself? I could not find anyway to get these files. W/O them, my Calterm is basically useless.
A: You need to know someone who works for a Cummins Distributor, only a few Dealers have it, they are the only people who use Calterm. Early engines Celect, C Plus, ISM QSB VP44 and QSK use E2M files, engines after Common Rail ISBe use ECFG files. These files are not contained within the Insite calibration file as far as I know.
Q: I have cummins insite and the inline 5 adapter installed and running on my computer. question is, can I download DDDL (Detroit diesel diagnostic link) software anywhere and use my inline 5 adapter to connect to the trucks? is it possible?
A: Just get the Cummins driver for the inline5. I have the same inline5 running dddl and a bunch of other programs only problem is that it only connects with 1708.
Q: Did you find out if it’s possible to use the CAT adapter for Cummins?
A: Any Rp1210 adapter will work on cummins engine with cummins Insite soft
Q: Is it reliable to get a Chinese Inline 5?

Is it possible to buy a Cummins Inline 5 clone with success?

Can I buy a Cummins Inline 5 data link adapter from Chinese? Any reliable site to have it?

Yep. Look here – it’s for those who are looking for a Cummins Inline 5 China clone.

 

Anyone has a good experience of Chinese inline 5? working or not?

Chinese inline 5 adapter is working well for diesel truck
Compatible with both XP and win7
Needs active
Can update, so far the SW is 7.6.2.

Chinese-Cummins-inline-5-review-1

I’m wondering if anyone has brought a Chinese inline 5 adapter and if it actually works.

Yes. i bought one about 2 years ago and have no problems…it cost 300 bucks Canadian….hope ya have better luck

Chinese-Cummins-inline-5-review-2

What’s the difference of Inline 5 the original and the China clone?

I bought a Chinese Cummins Inline 5 very similar to original, tried both on 12V with cummins insite 7.5 and service maxx v41. Picture original versus clone (original have protective lack paint and stamp on both side)

Chinese-Cummins-inline-5-review-3

Original

cummins-inline-5-original-pcb-1

Clone

cummins-inline-5-clone-pcb-1

Original

cummins-inline-5-original-pcb-2

Clone

cummins-inline-5-clone-pcb-2

http://blog.obdii365.com/2018/03/29/cummins-inline-5-clone-works-where-to/

 

How to Set up Cummins Insite 7.6.2 on VMware

This is a how-to’s of Cummins 7.62 Inline Reader 5 or 6 installation on virtual machine.

 

If I buy an Inline 5 or 6 adaptor kit, is the insight software is on this CD as well?

 

The CD with software it’s usually included, and shipped together with a Cummins Inline Reader 5 or 6 data link adapter. Look here:

INLINE 5 Insite 7.62
INLINE 6 Insite 7.62

 

Which Windows version should I use with a virtual machine?

 

You can always use a virtual machine to run any version of windows you may need. But I think I heard guys running INSITE 7.6 on windows 10.

 

How to setup and install Insite 7.6.2 on Windows vitual machine?

 

Your Virtual Machine is also known as Compatibility mode in Windows. Before you click on the Install .exe for your program, simply right click the Icon, go to properties, then compatibility and click on run this in compatibility mode and select the operating system you want to run it under.

Cummins Insite 7.6.2 like windows XP or 7 but this will not guarantee it will work I’ve had issues with Ca1t3rm not responding to this at all. So the best bet is what experienced users suggested and buying a windows xp or windows 7 (32 bit) machine and dedicating to truck diagnostics only. NOTHING ELSE. It is now a tool that belongs to your truck. If you don’t treat it that way you run the risk of corrupting programs, files, virus’s, Malware, anything and everything that the wild world web will throw at it. You can also install OEM diagnostic programs for Volvo, International, ABS etc… on this machine. I haven’t found an OEM program that Windows 7 (32 bit) won’t run

You can easily build and have built for you really strong machines being these older windows platforms are cheap. I recommend a Panasonic Toughbook just for the durability of taking a beating and it’s handy dandy carrying handle (it makes me feel professional when I’m all covered in dirt in my 3 piece overalls)

insite-cummins-vitual-machine-install

The last – another important note you’d better read:

The site http://blog.obdii365.com/2018/03/08/why-buy-cummins-insite-7-62-instead-of-insite-8-xx/talking about Why did I buy Cummins Insite 7.62 instead of Insite 8.xx?

 

Hope this helps you all.

http://blog.obdii365.com/2018/03/25/install-cummins-inline-6-insite-7-62-on-virtual-machine/

insite-cummins-vitual-machine-install6

Cummins Insite 8.2.0.184 Installation and Activation

Here are the step-by-step guides on installing & activating Cummins Insite 8.2.0.184 Pro version and Lite (Count) version on Windows 10 (including patch download).
Software version: 8.2.0.184
cummins-insite-820-1
cummins-insite-820-2
Difference between insite 8.2 Pro version and Lite Version:
Pro version including all function of Lite version, and also including Automotive Calibrations Data Cummins INCAL and Reflash ECU data, read & write ECU
Multi-language available: English(united states)/Chinese(simplified)/Danish/Dutch/Finnish/French/German/Italian/Japanese/Korean/Norwegian/Portuguese/Russian/Spanish/Swedish/Turkish
Compatible truck diagnostic tools:
1.Cummins INLINE 6 Data Link Adapter
2.Cummins INLINE 5 Data Link Adapter
3.DPA5 Dearborn Protocol Adapter 5 Heavy Duty Truck Scanner
4.NEXIQ USB Link
5.XTruck USB Link
6.AUGOCOM H8 Truck Diagnostic Tool
How to Install & Activation Cummins INSITE 8.2.0 Lite (Count) version?
How to Install & Activation Cummins INSITE 8.2.0 Pro version?
Operating system: Windows 7-Windows 10
Windows 10 you should disable anti-virus program and run software as administrator. 

Part 1: Install & Activate Cummins INSITE 8.2.0 Lite version

First you need to download patch for Lite version
Step 1: Install INSITE 820 Lite software
Open software folder
install-insite-820-lite-version-1
Extract INSITE8.20.184 zip file to desktop
Open INSITE8.20.184 folder
install-insite-820-lite-version-2
Open autorun
install-insite-820-lite-version-3
install-insite-820-lite-version-4
install-insite-820-lite-version-5
Select Manual Install Options->Required Installs->Install INSITE
install-insite-820-lite-version-6
Select INSITE language
Install Microsoft.NET Framework 4.5 Full
install-insite-820-lite-version-7
Install INSITE Data Pack
install-insite-820-lite-version-8
Accept INSITE Data Pack license agreement
Click Next
install-insite-820-lite-version-9
Finish Install data pack
install-insite-820-lite-version-10
Install INSITE CSS Service
Click Next
install-insite-820-lite-version-11
Verify PC date and time.
INSITE contains features which are dependent upon an accurete PC date and time. Please verify that
the date and time settings are correct before continuing the installation.
Tick “I have verified hat the date and time settings are correct”
Click Next
Accept license agreement
Click Install
install-insite-820-lite-version-12
Finish install INSITE software
This will generate Cummins INSITE software on desktop
Step 2: Activate INSITE 8.2 Lite version
Run Cummins INSITE software as administrator (very important)
Accept 2 license agreements
install-insite-820-lite-version-13
Select Simulator Mode
Exit INSITE software
install-insite-820-lite-version-14
Delete all files on desktop
install-insite-820-lite-version-15
Download INSITE 820 Count patch above and paste it to desktop
install-insite-820-lite-version-16
Run “820 Count” file and send the SN (hardware ID) to your dealer
install-insite-820-lite-version-17
Dealer will send you user name and activation key
install-insite-820-lite-version-18
Enter user name and activate here
Click on Register
install-insite-820-lite-version-19
Registration success. Now you can use Cummins Insite Lite version.

Part II: Install & Activate Cummins INSITE 8.2.0 Pro version

First you need to download patch for activation as well
Step 1: Install INSITE Pro software
Extract INSITE8.20.184 pro zip file to desktop
Open INSITE8.20.184 folder
Open autorun
Select Manual Install Options->Required Installs->Install INSITE
Select INSITE language
Install Microsoft.NET Framework 4.5 Full
Install INSITE Data Pack
Accept INSITE Data Pack license agreement
Click Next
Finish Install wizard
Install INSITE CSS Service
Click Next
Click Next
Verify PC date and time.
INSITE contains features which are dependent upon an accurete PC date and time. Please verify that
the date and time settings are correct before continuing the installation.
Tick “I have verified hat the date and time settings are correct”
Click Next
Accept license agreement
Click Install
Finish install INSITE software
Step 2: Activate INSITE 8.2.0 Pro verison
Run Cummins INSITE software as administrator (very important)
Accept 2 license agreements
Select Simulator Mode
Exit INSITE sofware
Delete all files on desktop
install-insite-820-pro-1
Download Cummins INSITE 8.2.0 pro pacth and paste it on desktop
install-insite-820-pro-2
Run “820 Pro” file and send the SN to the dealer
install-insite-820-pro-3
Dealer will send you User name and register key
install-insite-820-pro-4
Paste user name and register key here.
Now you have activated the INSITE Pro software.
Start using the software.

How to register and install Cummins Inline 5

Nexiq 125032/Xtruck USB Link diesel truck diagnostic interface comes with multiple software applications, i,e cummins,isuzu,cat,DAP5,volvo PTT,nissan. Here is the instruction on how to register and install Cummins Inline 5 Insite heavy duty diagnostic software.

 

How to register Cummins Inline 5 Insite?

1.Please install cummins insite software,then click cummmins insite icon.

register-commins-inline-5-1

2.When you start the cummins insite software,it will show you the PC ID.

register-commins-inline-5-2

3.Run the keygen of cummins inline 5.Input the PC id and generate the password.

register-commins-inline-5-3

4.It will have two password,basic and pro,input the basic firstly,then you need to input pro one.

register-commins-inline-5-4

register-commins-inline-5-5

How to install Cummins Inline 5 truck Nexiq 125032?

1.NEXIQ includes 4 CDs,please check the cummins software,and open the folder.Two folder,one is cummins inline5 setup files,one is register file.

cummins-inline-5-install-1

2.Open set up folder,and choose the software like following pic shows to run.

cummins-inline-5-install-2

3.Complete this installation.

cummins-inline-5-install-3

4.This software is update manager,the device NEXIQ only need cummins insite,it setup over just now,so choose cancel,cancel the other three software.

cummins-inline-5-install-4cummins-inline-5-install-5

5.Start cummins insite icon,open this application.Then  it will display the register info.

cummins-inline-5-install-6

6.You can send us the PC id to use to get password,or you can open the register folder and keygen to activate it by yourself.

cummins-inline-5-install-7

7.After activation,use NEXIQ USB Link connect cummins engine,we must add new connect first.

cummins-inline-5-install-8

www.obdii365.com