DigiProg 3 Digiprog III

Digiprog III, Digiprog 3 or DP3 is the most popular and affordable odometer correction tool master in the aftermarket.  The latest software version goes to digiprog v4.94.

 

Digiprog III V4.94 Screen Display:
digiprog 3 software

 

 Digiprog III Features:

1. Newest Version: V4.94
2. Add more car models on the basic of V4.88
3. Worldwide leader in digital speedo programming and correction software.
4. Support Multi-language: Deutsch/ English/ Espanol/ French/ Portuguese/ Italiano/ Turkish/ Nederlands.
5. It has years of experience in digital vehicle engineering.

6. Its quality standards are second to none.
7. Power-On Password: 1
8. There are ST01/02 and ST04 Adapter in the Package Already, No Need to Buy Them Alone
V4.94 Digiprog 3 Features: 
1. Service interval adjustments and settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication
Some Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned 4. completely as the solvent can damage the clips.
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.

The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.

Item No
SM47
SM47-B
SM47-D
SM47-E
SM47-F
Product Name
Software
V4.94
V4.94
V4.94
V4.94
V4.94
Language
Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
Power-On password
1
1
1
1
1
Manufacturer
SM47 and SM47-B made by same manufacturer
SM47-D and SM47DZ made by same manufacturer
SM47-E and SM47-F made by same manufacturer
Package
Full package with ST01 and ST04 cable
Main unit and OBD2 cable
Full package
Full package
Main unit and OBD2 cable
Update
Via Email
Via Email
Via Email
Send back to factory to update
Send back to factory to update
Vehicle coverage
Comprehensive
Vehicle coverage may slightly different from different manufacturers
Odometer correction way
The same as SM33 series, some need to dissemble the dashboard, some via OBD. Follow the system prompts.
DIGIPROG 3 FAQ:
About vehicle model:
Q: Does Digiprog III change mileage for BMW after 2008year? Does Digiprog3 make key for BMW?
A: Better use Digimaster 3 to program mileage for the high-end BMW. Digiprog3 can’t make key for BMW, advice you use AK300 key pro.
Q: Does digiprog3 work with VW golf 6 2009, golf 5 2006 and Peugeot 407 2006?
A: Yes. Digiprog 3 does. Please refer to digiprog3 vehicle list above:
Q: I use digiprog3 (item No.SM33-C) to work with Opel Astra 2004, and the manual suggests use No.1 cable, this cable is ST01?
A: Yes, No.1 cable is ST01 cable, and the software needs to open off-line programming or online-programming.
About device and accessories:
Q: what is Digiprog III power-on password?
A: Digiprog 3 Power-on password is 1. After enter password “1”,
click tick” “not ” X”, otherwise Digiprog3 will freeze.
Q: What is ST01, ST04 cable used for in the package of Digiprog 3 (SM33-C)?
A: It needs to remove chip when you program mileage for some car models. One end of the ST01 cable and ST04 cable clip the chip, and the other end connect to digiprog3.
Q: What is the difference between tacho pro 2008 and digiprog 3?
A: Tacho pro 2008 and digiprog 3 share the same function. But tacho pro works with the car before 2006 year, digiprog 3 works with the car even up to 2012 year.
Q: Can I use Digiprog3 (item No.SM33) ST01 cable and ST04 cable to work with Yanhua brand Digiprog 3(item No.SM33-B)?
A: Yes, you can, but Yanhua brand Digiprog 3(item No.SM33-B) is better use this following adapter in the package, it works better and more stable.