Reprogram Honda CR-V 2015 Acceleration Body with AURO OTOSYS IM600

How to: Reprogram Honda CR-V 2015 acceleration body by using Auro OtoSys IM600 tablet diagnostic and programming system.

Select Programming->Honda->Diagnostic->Auto Scan, IM600 will read VIN, select control module: Engine

im600-honda-crv-acceleration-body-1
im600-honda-crv-acceleration-body-2
im600-honda-crv-acceleration-body-3
im600-honda-crv-acceleration-body-4

Diagnostic system initializing

Select Special Function->TP Position check

im600-honda-crv-acceleration-body-5
im600-honda-crv-acceleration-body-6

Honda software will reset the TP learning value
Need to clean the throttle body at the same time if reset the TP learning value

im600-honda-crv-acceleration-body-7

TP learning value has been cleared.
Clean the throttle body.

im600-honda-crv-acceleration-body-8

Do the idle learn procedure when the engine speed is unstable.

1. Make sure all electrical items (A/C,audio, rear window defogger, lights etc) are off.
2.Turn the ignition switch on, wait for 2 seconds
3.Start the engine and hold it at 3000 rpm with no load (in Park or neutral) until the radiator fan comes on or until the engine coolant temperature reaches 90 degree
4. Let the engine idle for a minimum of 5 minutes with no load.

Note: if the radiator fan from running. Don;t count its running time for 5 minutes.

im600-honda-crv-acceleration-body-9

Success.

Note: If you need IM600, please contact our customer service online: Email: Sales@OBDII365.com

Skype: OBDII365.com

0

Leave a Reply

Your email address will not be published. Required fields are marked *