How to Program Lamborghini LP560 Remote by Lonsdor K518ISE

Guide to use Lonsdor K518 key programmer to program/add Lamborghini LP560 remote key by OBD. (same procedures are applied to LP550, LP570 Gallardo)

K518 English version-Lonsdor K518ISE is released. Will be available in Otc, 2017.

Reference:

OBD Location: Under the steering wheel

Lamborghini-LP560-obd-location
Vehicle model: LP550,LP560  LP570 Gallardo
Lamborghini-LP560-1
Remote Key type:
lp560-remote
Dashboard type:
LP560-dashboard
Pin code: No need

Remote program: by Lonsdor K518ISE key programmer

Guide:

Step 1: Program remote

Connect K518 host with vehicle

Turn on K518ISE

Select Immobilizer->Lamborghini->LP560

turn-ignition-on
Turn ignition switch to ON position
turn-ignition-off
Turn ignition OFF and then turn it ON

Configuring… please wait

select-remote-position
Select a remote position to write key (4 position optional/available )

Communicating…

press-unlock-button
Press on the Unlock button of the remote key for 1s within 5s
remote-programmed
No you can see remote position 1 has been programmed

Processing…

program-success
Program remote success.


Step 2: Delete Remote

If 4 remote position are occupied, you can delete remote to program other remote again

Turn ignition switch to ON position

Turn ignition OFF and then turn it ON

Configuring… please wait

remote-position-2-programmed
Position 1 and 2 has been programmed
configuring
Communicating…
delete-success
Delete success.

www.obdii365.com
http://lonsdor-k518ise.blogspot.com/2017/10/lonsdor-k518-program-lamborghini-lp560-remote-key.html
0

Leave a Reply

Your email address will not be published. Required fields are marked *