Audi A6 2013 ECU Online Coding by VAS 5054A ODIS

This is the guide on how to do Audi online coding service using ODIS software together with VAG diagnostic tool. It’s coding example of Audi A6 2013.
Purpose:
Audi Online Coding
Model:
Audi A6 2013
All needed:
-working odis software (3.0.3/4.0.0)
-a HQ 5054a device:
Vas 5054a clone….confirmed!
Vxdiag vcx nano 5054a….confirmed!
Network status:
Connected; Online
Open VX Manager
vxdiag-manager
It’s connected to the Internet: Online
Open ODIS Audi
Warning/notes: OK
odis-audi
Start diagnosis
odis-diagnosis
Pick up vehicle: Audi A6 2013
audi-a6-2013
Select Engine electronic control system to identify control unit
engine-control-unit
Then, select Boot function
boot-function
Select ECU coding and Confirm to continue
ecu-coding
Then follow ODIS instruction; do and click on Complete/Continue
follow-odis
Connector the vas 5054 connector to the vehicle
Switch on ignition
turn-ignition-to-on
The ECU self-test did not find any fault code
Yes to do ECU online coding
ecu-online-coding
Yes to start the comparison of Predetermined value/ Actual value
Actual-value
The test completes
test-completes
Prepare to comparison of Predetermined value/ Actual value
Please connect a charger to the car
charger-to-car
For users with wireless scan tool (VAS5054A or Vxdiag vcx nano 5054), please connect it via the USB cable to avoid any change of Bluetooth connection
connect-vas-5054a
Start comparison of Predetermined value/ Actual value
When reading data, connect the  diagnostic tool to the corresponding hardware with working Network
working-network
Make sure an appropriate charger is connected
charger-connected
Have read data
read-data
Connect the diagnostic tool to the corresponding hardware with working Network
Establish network connection, then go on. Enter user id
enter-user-id
enter-user-id-2
Diagnostic report sent
diagnostic-report
Success!
success
Coding completed.
coding-complete
0

Leave a Reply

Your email address will not be published. Required fields are marked *