Change BMW Navigation Display Language by Ncs expert

This is step-by-step guide on how to use BMW INPA K+DCAN cable to change E60 navigation language, running with bmw software inpa, ncs expert and ncs dummy.

 

Purpose:

to change bmw navigation display language

 

Car:

BMW E60 LCI ANNEE 2007

 

To change the navigation language for free:

Only Italian, Dutch, English available in iDrive menu if using this method

bmw-e60-navigation-language-change-1

bmw-e60-navigation-language-change-2

bmw-e60-navigation-language-change-3

bmw-e60-navigation-language-change-4

bmw-e60-navigation-language-change-5

bmw-e60-navigation-language-change-6

Using K+DCAN cable to change E60 navigation language display:

First: check the battery and ignition status in INPA

Connect K+DCAN cable to the car and car

inpa-cable-check-igintion-1

(the port is close to the left front door, near the the steering wheel)

Run INPA on Windows xp system

inpa-cable-check-igintion-2

Check the battery and ignition is on

inpa-cable-check-igintion-3

Then quit inpa software

 

Next, Run NCS Expert

Go to the menu bar, select File-> Load file

ncs-expert-change-navigation-language-1

Select Revtor’s NCS Expert Profile

ncs-expert-change-navigation-language-2

Click on FG/ZCS/FA (F1)

ncs-expert-change-navigation-language-3

Then ZCS/FA.. (F3)

ncs-expert-change-navigation-language-4

Select E60, then CAS

ncs-expert-change-navigation-language-5

ncs-expert-change-navigation-language-6

Click on Zuruck (F6), and get the info

ncs-expert-change-navigation-language-7

Then click on SG bearbeiter (F4)

Then CAPPL

ncs-expert-change-navigation-language-8

ncs-expert-change-navigation-language-9

ncs-expert-change-navigation-language-10

Then click on SG auslesen (F4), and get the new info

ncs-expert-change-navigation-language-11

ncs-expert-change-navigation-language-12

Then, run Run Ncs Dummy

Select module (it’s read by ncs expert)

ncsdummy-navi-language-setup-1

Browse for FSW/PSW or Nettodate trace 1 (it’s PSW_PSW.TRC)

ncsdummy-navi-language-setup-2

Page down for SPRACHEN – Languages

ncsdummy-navi-language-setup-3

Here, take French. Select FSW_PSW.MAM

ncsdummy-navi-language-setup-4

Then close NcsDummy and will pop up message: trace manipulation file “FSW_PSW.MAM” is not empty. It’s recommended to empty this file after coding. Do you want to empty the file?

Click on Cancel

get the Job Name info

ncsdummy-navi-language-setup-5

Click on Job andern (F2) in NcsDummy

Select the job name

ncsdummy-navi-language-setup-6

ncsdummy-navi-language-setup-7

Click on Job ausfuhrer (F3)

ncsdummy-navi-language-setup-8

ncsdummy-navi-language-setup-9

Click on Zuruck (F6) and close the interface

 

Finally, Check the navigation language

it’s French as the setup just now

bmw-e60-navi-language-change-1

bmw-e60-navi-language-change-2

http://blog.obdii365.com/2016/11/18/change-bmw-navigation-language-by-ncs-expert-k-dcan/

0

Leave a Reply

Your email address will not be published. Required fields are marked *