Toyota Techstream check trans temperature & fluid level

Here’s an instruction on how to check transmission temperature and access to trans fluid level for Camry 2009, using Toyota diagnostic software Techstream TIS for the knock off mini vci cable.

 

Connect MINI VCI cable to the car

then run the Techtream software:

Click on Connect to vehicle

Initializing USB communication…

Connecting to vehicle…

Select model: Toyota Camry 2009 2AZ-FE w/o VSC

techstream-check-transmission-temprature-1

Click on OK to continue

Select Engine and ECT

techstream-check-transmission-temprature-2

DTC monitors are incomplete

techstream-check-transmission-temprature-3

Click on Data List

techstream-check-transmission-temprature-4

Read parameters

techstream-check-transmission-temprature-5

techstream-check-transmission-temprature-6

techstream-check-transmission-temprature-7

techstream-check-transmission-temprature-8

Shift status from P to 4-D

techstream-check-transmission-temprature-9

Dashboard display

techstream-check-transmission-temprature-10

In Toyota Techstream, shift status (D) value: ON

techstream-check-transmission-temprature-11

and 47 seconds to increased 0.6 degree C

techstream-check-transmission-temprature-12

techstream-check-transmission-temprature-13

techstream-check-transmission-temprature-14

 

Once the car reaches 10-15 degree C, it’s ok to check the trans fluid level

DONE!

0

Leave a Reply

Your email address will not be published. Required fields are marked *