How to Program Dodge Challenger 2011 key fobik

To program new key for Dodge Challenger, you need security code to access. Here is the instruction on reading security code and program new key fobik for Challenger 2011 using original Xtool X100 Pad key programmer.

I. Read security code

Connect the X100 Pad with vehicle via OBD diagnostic socket

Power on the device

Select “Immobilization” in function menu

xtool-x100-pad-program-gmc-sierra-key-1

Select vehicle brand

Select vehicle model: Challenge 08-12

xtool-x100-pad-select-dodge-1

Select “Read security code”

xtool-x100-pad-read-security-code-2

Communicating with vehicle

xtool-x100-pad-security-code-3

X-100 Pad read pin code successfully

II. Program New Key

Select “Program new key”

xtool-x100-pad-program-new-key-4

Switch ignition off. Insert the new key and switch ignition on. Press OK to continue.

xtool-x100-pad-program-new-key-5

Xtool X-100 Pad will require to enter security code, manually enter the code just read

xtool-x100-pad-enter-security-code-6

Program success

xtool-x100-pad-program-success-7

Test the new programmed key

xtool-x100-pad-test-new-key-8

http://www.key-programmer.org/2016/09/02/xtool-x100-pad-program-dodge-challenger-key/

0

Leave a Reply

Your email address will not be published. Required fields are marked *